Updating Results
Menu
Updating Results

Search Courses

Showing 150 items

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate III in Electronics and Communications

    Certificate

    This course provides training in selecting, installing, setting up, testing, fault finding, repairing and maintenance of electronic equipment and devices at component/sub-assembly level. There are elective options in radio frequency and security.

    Entry Requirements

    If you are entering this course as an apprentice/trainee you must:
    - be employed in industry
    - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Australian Apprenticeship Centre (AAC) prior to enrolment.

    This course has pre-requisite requirements as shown below. All prerequisites must be achieved. Discuss with a CIT teacher during enrolment to ensure you have met these requirements.

    To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).

    Show more
  • Holmesglen Institute of TAFE

    Holmesglen Institute of TAFE

    Certificate II in Electrotechnology (Career Start)

    Certificate

    The UEE22020 Certificate II in Electrotechnology (Career Start) offers secondary school students a chance to develop competencies for a work entry program providing grounding in safety, and basic skills and knowledge for work in any electrotechnology industry.

    Entry Requirements

    When undertaking the course, you must be enrolled as a VCE or VCE student.

    In addition, learners must be at least 16 years of age when enrolling in the program. This requirement meets the minimum age requirements for training and working in the Electrotechnology field in Victoria, determined by Energy Safe Victoria (ESV).

    This course requires at least Year 10 mathematical knowledge, and is not recommended if you find mathematics at this level challenging.

    Prior to enrolment or commencement of training you will be required to complete a literacy and numeracy assessment and a pre-training interview. These will assist with determining your suitability to the course, verify your training plan, and identify any learning support needs.

    Note: During this course, you are required to provide overalls, work boots and clear safety classes.

    Show more
  • South Metropolitan TAFE

    South Metropolitan TAFE

    Certificate III in Electrotechnology Electrician

    Certificate

    Are you looking for an electrical career and current skills?. When you complete the Certificate III in Electrotechnology Electrician you'll be looking at a career as a licensed electrician (additional requirements apply).

    Entry Requirements

    School Leaver Non-School Leaver AQF
    OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

    This course is available as an apprenticeship.

    Entrance requirements for apprenticeships

    You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship.

    An apprenticeship involves full time work with an employer who provides an opportunity to learn all aspects of a trade. This is a structured program for a fixed period of time and while you learn on the job, you also attend off the job training at SM TAFE.

    Some of the benefits of an Apprenticeship are that you can:

    • earn a wage while you train
    • learn on the job skills combined with off the job training
    • receive a nationally recognised qualification on successful completion
    • start a valuable step towards a rewarding career path
    Show more
  • North Metropolitan TAFE

    North Metropolitan TAFE

    Certificate II in Electronics

    Certificate

    Are you looking for an electronics career?. North Metropolitan TAFE is offering a dual qualification in Electronics and Computer Assembly and Repair.

  • University of Adelaide

    University of Adelaide

    Bachelor of Engineering (Honours)(Electrical and Electronic) with Bachelor of Finance

    Bachelor (Honours)

    From smart devices to medical imagery and defence technologies, electrical and electronic engineering contributes to every aspect of modern life.For engineers working in this ever-growing field, financial expertise offers significant benefits.

  • Charles Darwin University (CDU)

    Charles Darwin University (CDU)

    Certificate III in Electrotechnology Electrician

    Certificate

    This course is not available for online applications. Please contact the team on the details below for further information on how to apply.

    Entry Requirements

    To gain entry into UEE30820 Certificate III in Electrotechnology, candidates require:

    • To be an apprentice who has entered a training contract with their employer and Australian Apprenticeship Support Network NT
    • Hold an <a href=https://electricallicensing.nt.gov.au/home>NT Apprentice Training Licence (Red Card)</a>
    Show more
  • Holmesglen Institute of TAFE

    Holmesglen Institute of TAFE

    Certificate II in Electrotechnology (Career Start)

    Certificate

    The UEE22011 Certificate II in Electrotechnology (Career Start) is a pre-apprenticeship electrical course, providing an introduction to the electrical/electronics industries in areas such as electrical, renewable energy, air conditioning/refrigeration and instrumentation.

    Entry Requirements

    Learners must be at least 16 years of age when enrolling in the program. This requirement meets the minimum age requirements for training and working in the Electrotechnology field in Victoria, determined by Energy Safe Victoria (ESV).

    Learners must have a minimum of Year 10 English and Mathematics (Year 11 highly recommended).

    This course is not recommended if you find mathematics at this level challenging.

    Prior to enrolment or commencement of training you will be required to complete a literacy and numeracy assessment and a pre-training interview. These will assist with determining your suitability to the course, verify your training plan, and identify any learning support needs.

    COVID-19 vaccination requirements
    Please refer to our coronavirus update page to view current vaccine requirements.

    Show more
  • North Metropolitan TAFE

    North Metropolitan TAFE

    Certificate III in Timber and Composites Machining

    Certificate

    Get into the timber machining industry This course will provide you with the opportunity to develop the skills and knowledge to perform timber and composites machining for the manufacture of furniture, built in and freestanding cabinetry and other timber components.

  • North Metropolitan TAFE

    North Metropolitan TAFE

    Certificate III in Electronics and Communications

    Certificate

    Extend your knowledge and skills in electronics and communications This course will provide you with the practical skills and knowledge to assemble, install, test, service, and repair electronic systems and equipment in general electronics, communications, computer or consumer electronics.

  • South Metropolitan TAFE

    South Metropolitan TAFE

    Electrical Engineering Project skill set

    Non-Award

    Discover how to work as part of a diverse engineering team.. Learn how to design, plan, manage, and execute electrical engineering projects with the use of industry leading tools and software.

    Entry Requirements

    Students should have completed their WACE General or ATAR (Minimum C Grades) or have year 12 equivalent to study this course.

    Students will need to have studied the following units prior to undertaking this skill set:

    • UEENEEE101A- Apply Occupational Health and Safety regulations, codes and practices in the workplace
    Show more
  • Central Regional TAFE

    Central Regional TAFE

    Certificate III in Electrotechnology Electrician

    Certificate

    Please note, this course can only be accessed by an employed apprentice, if this course interests you, please speak to your employer or employment agency about signing up as an apprentice..

    Entry Requirements

    School Leaver Non-School Leaver AQF
    OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

    Candidates must be an indentured apprentice with a Training Contract in place with Central Regional TAFE.

    Show more
  • University of Adelaide

    University of Adelaide

    Graduate Diploma in Engineering (Electronic)

    Graduate Diploma

    Electronic engineers design and construct tools we use each and every day-from smart devices to medical imagery and defence technologies.Our Graduate Diploma in Engineering (Electronic) is suited to engineering graduates and working engineers with relevant experience.

  • Federation University Australia

    Federation University Australia

    Certificate in Electrotechnology (Career Start)

    Certificate

    The UEE22020 Certificate II in Electrotechnology (Career Start) provides creative hands-on skills training and covers operational skills and knowledge such as electrical safety, Industry Standards and Regulations, identifying and selecting components, accessories, and materials, solving circuit...

  • RMIT University

    RMIT University

    Diploma of Surveying

    Diploma

    <div class="shortdescription font_museo500"> <p> Surveying relies on the collection, management and presentation of information that relates to land surveying, mapping and GIS.</p> </div>

  • Unitec Institute of Technology

    Unitec Institute of Technology

    Bachelor of Engineering Technology (Electrical)

    Bachelor

    Are you passionate about a career in electronic or electrical engineering? The Bachelor of Engineering Technology (Electrical) will equip you with the knowledge and skills for employment as an engineer, specialising in electronics, power, or mechatronics.

    Entry Requirements

    What you will need to study this programme.

    Domestic students
    Academic requirements

    You must have completed at least one of the following:

    • A minimum of 60 credits at NCEA Level 3 or higher on the National Qualifications Framework, with at least 3 'C' passes in the New Zealand University Bursaries Examinations;
      • A minimum of 14 credits at Level 3 in Physics and
      • A minimum of 14 credits at Level 3 in Mathematics (including Algebra and calculus); and
      • A minimum of 14 credits at Level 3 in one other subject from the list of approved NZQA UE subjects and
      • A minimum of 18 credits at Level 3 or higher taken from no more than two additional subjects from the approved subjects listed at NZQA;
    • Successful completion of New Zealand Diploma in Engineering (Electrical)
    • Equivalent academic qualifications may include:
      • University Bursary with 45% or more in both Physics and Calculus or Algebra or
      • Equivalent Cambridge score; or
      • Equivalent International Baccalaureate
    And meet one of the English entry requirements;
    • University Entrance Literacy: 10 credits at Level 2 or above in English or Maori (5 in Reading, 5 in Writing); or
    • Provide evidence that they have the English language proficiency required for the Programme as demonstrated through evidence of one of the kinds described in NZQA Rules on the Unitec English Language Requirements for International Students Web-page.

    Don't meet these Academic requirements?

    • If you don't meet the academic criteria, our Bridging Education Programmes can help you qualify. Simply apply online, and we'll discuss your next steps.
    • If you don't meet the above criteria, special or discretionary admission may apply; your eligibility will be determined at the interview.

    For more information, download the programme regulations (PDF 552 KB)

    International students Academic requirements

    As a part of this requirement, you must be at least 16 years of age and meet one of the below;

    • Successful completion of New Zealand Diploma in Engineering (Electrical)
    • All applicants must be at least 16 years of age when they begin their studies, and they should meet the country-specific admission requirement;

    And English entry requirements;

    If English is not your first language, you will also need at least one of the following qualifications:

    • Evidence of an IELTS (Academic) band score of at least 6 with writing and speaking scores no less than 6.0 and reading and listening bands no less than 5.5; or
    • University Entrance Literacy: 10 credits at Level 2 or above in English or Maori (5 in Reading, 5 in Writing); or
    • Evidence of English language proficiency as outlined in the NZQA Rules on the Unitec English Language Requirements for International Students Web-page.

    Don't meet these Academic requirements?

    • If you don't meet the academic criteria, our Bridging Education Programmes can help you qualify. Simply apply online, and we'll discuss your next steps.
    • If you don't meet the above criteria, special or discretionary admission may apply; your eligibility will be determined at the interview.

    For more information, download the programme regulations (PDF 552 KB)

    Show more