This course provides training in selecting, installing, setting up, testing, fault finding, repairing and maintenance of electronic equipment and devices at component/sub-assembly level. There are elective options in radio frequency and security.
Entry Requirements
If you are entering this course as an apprentice/trainee you must: - be employed in industry - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Australian Apprenticeship Centre (AAC) prior to enrolment.
This course has pre-requisite requirements as shown below. All prerequisites must be achieved. Discuss with a CIT teacher during enrolment to ensure you have met these requirements.
To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).
The UEE22020 Certificate II in Electrotechnology (Career Start) offers secondary school students a chance to develop competencies for a work entry program providing grounding in safety, and basic skills and knowledge for work in any electrotechnology industry.
Entry Requirements
When undertaking the course, you must be enrolled as a VCE or VCE student.
In addition, learners must be at least 16 years of age when enrolling in the program. This requirement meets the minimum age requirements for training and working in the Electrotechnology field in Victoria, determined by Energy Safe Victoria (ESV).
This course requires at least Year 10 mathematical knowledge, and is not recommended if you find mathematics at this level challenging.
Prior to enrolment or commencement of training you will be required to complete a literacy and numeracy assessment and a pre-training interview. These will assist with determining your suitability to the course, verify your training plan, and identify any learning support needs.
Note: During this course, you are required to provide overalls, work boots and clear safety classes.
Are you looking for an electrical career and current skills?. When you complete the Certificate III in Electrotechnology Electrician you'll be looking at a career as a licensed electrician (additional requirements apply).
Entry Requirements
School Leaver
Non-School Leaver
AQF
OLNA or NAPLAN 9 Band 8
C Grades in Year 10 English and Maths or equivalent
Certificate I or Certificate II
This course is available as an apprenticeship.
Entrance requirements for apprenticeships
You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship.
An apprenticeship involves full time work with an employer who provides an opportunity to learn all aspects of a trade. This is a structured program for a fixed period of time and while you learn on the job, you also attend off the job training at SM TAFE.
Some of the benefits of an Apprenticeship are that you can:
earn a wage while you train
learn on the job skills combined with off the job training
receive a nationally recognised qualification on successful completion
start a valuable step towards a rewarding career path
Spark up a career as a licensed electrician.. The Certificate III in Electrotechnology Electrician must be completed as part of an apprenticeship, and upon successful completion, allows participants to work as a qualified electrician.
From smart devices to medical imagery and defence technologies, electrical and electronic engineering contributes to every aspect of modern life.For engineers working in this ever-growing field, financial expertise offers significant benefits.
The Bachelor of Engineering (Electrical and Information Engineering) (Honours) will equip you with the technical, problem solving and communication skills required to meet the high demand for graduates in electrical and information engineering.
The UEE22011 Certificate II in Electrotechnology (Career Start) is a pre-apprenticeship electrical course, providing an introduction to the electrical/electronics industries in areas such as electrical, renewable energy, air conditioning/refrigeration and instrumentation.
Entry Requirements
Learners must be at least 16 years of age when enrolling in the program. This requirement meets the minimum age requirements for training and working in the Electrotechnology field in Victoria, determined by Energy Safe Victoria (ESV).
Learners must have a minimum of Year 10 English and Mathematics (Year 11 highly recommended).
This course is not recommended if you find mathematics at this level challenging.
Prior to enrolment or commencement of training you will be required to complete a literacy and numeracy assessment and a pre-training interview. These will assist with determining your suitability to the course, verify your training plan, and identify any learning support needs.
COVID-19 vaccination requirements Please refer to our coronavirus update page to view current vaccine requirements.
Get into the timber machining industry This course will provide you with the opportunity to develop the skills and knowledge to perform timber and composites machining for the manufacture of furniture, built in and freestanding cabinetry and other timber components.
Extend your knowledge and skills in electronics and communications This course will provide you with the practical skills and knowledge to assemble, install, test, service, and repair electronic systems and equipment in general electronics, communications, computer or consumer electronics.
Discover how to work as part of a diverse engineering team.. Learn how to design, plan, manage, and execute electrical engineering projects with the use of industry leading tools and software.
Entry Requirements
Students should have completed their WACE General or ATAR (Minimum C Grades) or have year 12 equivalent to study this course.
Students will need to have studied the following units prior to undertaking this skill set:
UEENEEE101A- Apply Occupational Health and Safety regulations, codes and practices in the workplace
Have a career dream to work on key oil and gas projects and reach your true potential in a supervisory role? Become a highly skilled operator in process plant technology with this advanced qualification..
Entry Requirements
School Leaver
Non-School Leaver
AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent
Completion of WACE General or ATAR or equivalent (minimum C Grades)
Certificate III
New students who have not studied PMA50116 Diploma of Process Plant Technology must apply instead for the lower level qualification due to pre-requisite skills/knowledge requirements. Students that have already completed PMA50116 Diploma of Process Plant Technology are eligible to apply for a credit transfer to reduce the study load and overall course cost.
Please note, this course can only be accessed by an employed apprentice, if this course interests you, please speak to your employer or employment agency about signing up as an apprentice..
Entry Requirements
School Leaver
Non-School Leaver
AQF
OLNA or NAPLAN 9 Band 8
C Grades in Year 10 English and Maths or equivalent
Certificate I or Certificate II
Candidates must be an indentured apprentice with a Training Contract in place with Central Regional TAFE.
Electronic engineers design and construct tools we use each and every day-from smart devices to medical imagery and defence technologies.Our Graduate Diploma in Engineering (Electronic) is suited to engineering graduates and working engineers with relevant experience.
The UEE22020 Certificate II in Electrotechnology (Career Start) provides creative hands-on skills training and covers operational skills and knowledge such as electrical safety, Industry Standards and Regulations, identifying and selecting components, accessories, and materials, solving circuit...
This qualification provides a trade outcome through an apprenticeship in Electrotechnology covering work in domestic, industrial and commercial applications.
Do you want to be a Sparky? This qualification provides you with the skills and knowledge to select, install, set up, test, fault find, repair and maintain electrical systems and equipment in buildings and premises.
Entry Requirements
As you are entering this course as an apprentice under the Australian Apprenticeships arrangements, you must be employed in the electrical contracting industry and you must register with an Apprentice Network Provider (ANP) prior to enrolment.
You MUST be supervised by licensed electrician. This program has pre-requisite requirements, all prerequisites must be achieved. Discuss with a CIT teacher during enrolment to ensure you have met these requirements.
Get your electrotechnology career started here. This pre-apprenticeship course will give you a head start in the industry, as you learn practical workplace skills involving basic hand and power tool use and the necessary knowledge to get your foot in the door.
The Certificate II in Electrotechnology (Career Start) is a pre-apprenticeship electrical course, providing an introduction to the electrical/electronics industries in areas such as electrical, renewable energy, air conditioning/refrigeration and instrumentation.
Entry Requirements
To be eligible, students must be at least 16 years of age.
Holmesglen recommends learners have a minimum of Year 10 level English and Mathematics; Year 11 is highly recommended. This course is not recommended if you find mathematics at this level challenging.
Prior to enrolment or commencement of training you will be required to complete a literacy and numeracy assessment and a pre-training interview. These will assist with determining your suitability to the course, verify your training plan, and identify any learning support needs.
