Take the first steps towards getting started in your Automotive career with this entry-level pre-employment course in Automotive Vocational Preparation, and get the basic skills you need to seek employment within the automotive mechanical or autobody repair industry.
Entry Requirements
You will be required to undertake the Basic Knowledge Skills Builder (BKSB) to confirm you have the required Language, Literacy and Numeracy (LLN) skills to work at Australian Core Skills Framework (ACSF) exit level 2 or higher. Account details and instructions will be sent to you within 24 hours of applying. If you have previously undertaken the Literacy and Numeracy Assessment - we will review your results and notify you if further action is required.
This course is not available for online applications. Please contact the team on the details below for further information on how to apply.
Entry Requirements
To ensure you have the right skills and support to succeed in your course, a Language, Literacy, and Numeracy (LL&N) evaluation helps identify any areas where you may need additional support to help you achieve your goals.
To gain entry into AUR32420 Certificate III in Automotive Refinishing Technology, candidates require:
To be an Apprentice who has entered a Training Contract with their employer and Australian Apprenticeship Support Network NT.
Understanding of basic computer skills, to navigate online learning materials and assessments.
Students will also need to wear work clothing suited to the automotive industry such as:
This qualification applies to people working in the maritime industry seeking an Australian Maritime Safety Authority (AMSA) certificate of competency to:Command and operate the engine of a vessel less than 12 metres long with unlimited for an outboard engine propulsion, or <100 kW for an...
Entry Requirements
There are no entry requirements for this qualification however to ensure you have the right skills and support to succeed in your course, a Language, Literacy and Numeracy (LL&N) evaluation helps identify any areas where you may need additional support to help you achieve your goals.
This course is not available for online applications. Please contact the team on the details below for further information on how to apply.
Entry Requirements
To gain entry into UEE31220 Certificate III in Instrumentation and Control, candidates are required to have:
Completion, or be a 3rd year apprentice, of UEE30820 Certificate III in Electrotechnology - Electrician
OR
Hold a current A-Grade Electrical Licence (unrestricted)
OR
Hold a Restricted Electrical Licence endorsed -Instrumentation & Controls-
To ensure you have the right skills and support to succeed in your course, a Language, Literacy, and Numeracy (LL&N) evaluation helps identify any areas where you may need additional support to help you achieve your goals.
This course is not available for online applications. Please contact the team on the details below for further information on how to apply.
Entry Requirements
To ensure you have the right skills and support to succeed in your course, a Language, Literacy and Numeracy (LL&N) evaluation helps identify any areas where you may need additional support to help you achieve your goals.
To gain entry into the AUR30320 Certificate III in Automotive Electrical Technology, candidates require:
To be an Apprentice who has entered a Training Contract with their employer and Australian Apprenticeship Support Network NT.
Understanding of basic computer skills, to navigate online learning materials and assessments.
Students will also need to wear work clothing suited to the automotive industry such as:
Develop the specialist skills you'll need to work as an Engineering Technician with this advanced technical qualification.
Entry Requirements
To meet academic requirements for Diploma or Advanced Diploma courses, you need to successfully complete any TasTAFE course entry procedures and you also need to:
Have completed year 12 and provide TasTAFE with a copy of your Australian Senior Secondary Certificate of Education awarded to you by an agency or authority of a State or Territory; OR,
Provide TasTAFE with a copy of a qualification at Level 4 or above in the Australian Qualifications Framework that was awarded to you. This qualification must have been delivered in English; OR,
Complete an approved language, literacy and numeracy (LLN) assessment and display competence at or above Exit Level 3 in the Australian Core Skills Framework (ACSF) in both literacy and numeracy.
This course is not available for online applications. Please contact the team on the details below for further information on how to apply.
Entry Requirements
To ensure you have the right skills and support to succeed in your course, a Language, Literacy and Numeracy (LL&N) evaluation helps identify any areas where you may need additional support to help you achieve your goals.
To gain entry into AUR30620 Certificate III in Light Vehicle Mechanical Technology candidates require:
To be an Apprentice who has entered a Training Contract with their employer and Australian Apprenticeship Support Network NT
Understanding of basic computer skills, to navigate online learning materials and assessments
Students will also need to wear work clothing suited to the automotive industry such as:
The Diploma of Engineering is ideal if you're curious about studying engineering and would like to learn more, but are unsure about committing to a full undergraduate degree.
Entry Requirements
Admission requirements are met by one of the following:
Successful completion of the Northern Territory Certificate of Education and Training (or equivalent) and the awarding of an Australian Tertiary Admissions Rank (ATAR) of at least 60*.
Successful completion of a national qualification at Certificate III level or higher.
Successful completion of at least 0.5 year of full-time study (or equivalent) of a higher education degree/diploma.
Overseas secondary or tertiary qualifications considered equivalent to the above Australian qualifications.
Attainment of a STAT Multiple Choice score of 140.
Successful completion of the Tertiary Enabling Program, the Preparation for Tertiary Success courses, or other recognised tertiary preparation course.
Submission of an acceptable personal competencies statement and/or employment experience.
Defence members with service of 1 year or more at the following ranks (or higher) meet the academic entry requirement for this course:
Navy: Seaman, Able Seaman, Leading Seaman
Air Force: Aircraftmen/Aircraftwoman, Leading Aircraftman/Aircraftwoman, Corporal
Army: Private, Lance Corporal, Corporal
Current School Leaver Pathways:
Best of 3 Year 12 subject grades
School recommendation program
* After any applicable adjustment factors have been applied.
Become an effective leader in your field of engineering and build research skills. The 2-year Master of Engineering course will build on your previous knowledge and allow you to upgrade your qualifications.
Entry Requirements
Successful completion of a recognised Bachelor of Engineering, Bachelor of Engineering Science, Bachelor of Engineering Technology, Bachelor of Technology or equivalent international qualification in civil and structural, electrical and electronics, mechanical engineering or an approved equivalent discipline.
Note: applicants may only study in the stream that matches the engineering area of their undergraduate degree.
Are you a livewire seeking to progress your career in the Electrotechnology industry? Look no further... this course may be just the one you've been looking for!
Entry Requirements
This course is only available as an Australian Apprenticeship. You must have employment as an apprentice to enrol in this qualification.
Lay the foundations to work in Civil Construction with a strong base of essential skills in this practical program. Included is compulsory White Card training needed to work in this industry!
Engineer creative and logical solutions for real-world challenges. The Bachelor of Engineering Honours provides advanced science, in theory and practice, to qualify you as an engineer and solve problems in infrastructure, the environment or technology.
Entry Requirements
Admission requirements are met by one of the following:
Successful completion of the Northern Territory Certificate of Education and Training (or equivalent) and the awarding of an Australian Tertiary Admissions Rank (ATAR) of at least 70*.
Successful completion of a national qualification at Certificate IV level or higher.
Successful completion of at least 0.5 year of full-time study (or equivalent) of a higher education degree/diploma with a GPA of at least 3.
Overseas secondary or tertiary qualifications considered equivalent to the above Australian qualifications.
Attainment of a STAT Multiple Choice score of 147.
Successful completion of the Tertiary Enabling Program, the Preparation for Tertiary Success courses, or other recognised tertiary preparation course of at least 12 months duration.
Submission of an acceptable personal competencies statement and/or employment experience.
* After any applicable adjustment factors have been applied.
This course is not available for online applications. Please contact the team on the details below for further information on how to apply.
Entry Requirements
To gain entry into MEM30219 Certificate III in Engineering - Mechanical Trade, candidates require:
To be an Apprentice who has entered into a Training Contract with their employer and Australian Apprenticeship Support Network NT
To ensure you have the right skills and support to succeed in your course, a Language, Literacy and Numeracy (LL&N) evaluation helps identify any areas where you may need additional support to help you achieve your goals.
Help to engineer the future. CDU's Bachelor of Engineering Science will encourage you to think independently and find creative and logical solutions for real world challenges.
Entry Requirements
Admission requirements are met by one of the following:
Successful completion of the Northern Territory Certificate of Education and Training (or equivalent) and the awarding of an Australian Tertiary Admissions Rank (ATAR) of at least 60*.
Successful completion of a national qualification at Certificate IV level or higher.
Successful completion of at least 0.5 year of full-time study (or equivalent) of a higher education degree/diploma.
Overseas secondary or tertiary qualifications considered equivalent to the above Australian qualifications.
Attainment of a STAT Multiple Choice score of 140.
Successful completion of the Tertiary Enabling Program, the Preparation for Tertiary Success courses, or other recognised tertiary preparation course.
Submission of an acceptable personal competencies statement and/or employment experience.
Defence members with service of 1 year or more at the following ranks (or higher) meet the academic entry requirement for this course:
Navy: Seaman, Able Seaman, Leading Seaman
Air Force: Aircraftmen/Aircraftwoman, Leading Aircraftman/Aircraftwoman, Corporal
Army: Private, Lance Corporal, Corporal
* After any applicable adjustment factors have been applied.
This course is not available for online applications. Please contact the team on the details below for further information on how to apply.
Entry Requirements
To ensure you have the right skills and support to succeed in your course, a Language, Literacy and Numeracy (LL&N) evaluation helps identify any areas where you may need additional support to help you achieve your goals.
To gain entry into AUR31120 Certificate III in Heavy Commercial Vehicle Mechanical Technology, candidates require:
To be an Apprentice who has entered a Training Contract with their employer and Australian Apprenticeship Support Network NT.
Understanding basic computer skills, to navigate online learning materials and assessments.
Students will also need to wear work clothing suited to the automotive industry such as:
This course is not available for online applications. Please contact the team on the details below for further information on how to apply.
Entry Requirements
To ensure you have the right skills and support to succeed in your course, a Language, Literacy, and Numeracy (LL&N) evaluation helps identify any areas where you may need additional support to help you achieve your goals.
To gain entry into UEE22020 Certificate II in Electrotechnology as a VET in Secondary School student (VSS), candidates are required to:
Submit an expression of interest via the secondary school they are enrolled in and undertake an LL&N test.
