Amp up your career in electronics and telecommunications Complete the Certificate IV in Electronics and Communications and you'll have the practical skills and knowledge to work with radio/telecommunication, data systems/cabling and computer network hardware.
Complete this pre-apprenticeship course and you'll have what employers will are looking for in an apprentice light vehicle automotive service and repair technician. It will give you the skills, knowledge and behaviours to make you more competitive and give you a flying start in learning a trade.
Entry Requirements
School Leaver
Non-School Leaver
AQF
OLNA or NAPLAN 9 Band 8
C Grades in Year 10 English and Maths or equivalent
Certificate I or Certificate II
This qualification may be accessed by direct entry.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
RTO Entry Requirements
School based trainees are selected by the Employers/Host Employers according to their suitability.
Please note, this course can only be accessed by an employed apprentice, if this course interests you, please speak to your employer or employment agency about signing up as an apprentice..
Entry Requirements
School Leaver
Non-School Leaver
AQF
OLNA or NAPLAN 9 Band 8
C Grades in Year 10 English and Maths or equivalent
Certificate I or Certificate II
RTO Entry Requirements
An indentured apprentice with a Contract of Training between the employer and apprentice.
This training course may only be accessed through a training contract arrangement as an Apprentice.
Are you ready for an electronics career helping others get the message?. When you complete the Certificate IV in Electronics and Communications you'll be well on your way to a career as an electronic technician.
Entry Requirements
School Leaver
Non-School Leaver
AQF
C Grades in Year 11 WACE General English, and OLNA; or NAPLAN 9 Band 8
C Grades in Year 11 English and Maths or equivalent
Certificate II or Certificate III
This course is available as a traineeship.
Entrance requirements for traineeships
You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship.
In a traineeship you also gain hands-on skills and work experience, and improve your employment prospects, while earning a wage. On successful completion you will gain a nationally recognised qualification which can lead to rewarding career options. The difference between a traineeship and an apprenticeship is that a traineeship can be either a full time or part time employment based training arrangement, usually for a nominal duration of 12 months or more, generally in a non-trade related area.
To find out how to arrange a traineeship and study at South Metropolitan TAFE, please contact the Jobs and Skills Centre closest to you.
Learn how to operate a tractor safely. You will gain the skills and knowledge required to safely maintain and operate a tractor under general supervision in the agriculture, horticulture and land management sectors.
Do you have a passion for technology, gadgets and computers along with an interest in the inner workings of devices we use on a daily basis? Take the first step into your career in electronics with this nationally recognised qualification..
Entry Requirements
School Leaver
Non-School Leaver
AQF
OLNA or NAPLAN 9 Band 8
C Grades in Year 10 English and Maths or equivalent
Have you dreamed of becoming an Engineer, Electrician, Audiovisual Technician, or joining the mining industry? . In Electrotechnology, students embark on a specialised journey tailored for school students.
When you complete this course, you will be ready for a career in electrotechnology. You will have the skills and knowledge to select, install, set up, test, fault find, repair and maintain electrical systems and equipment in building and premises..
Entry Requirements
Students wishing to undertake a Traineeship, or an Apprenticeship must be employed in a training contract by an appropriate organisation to study. To find out more regarding Traineeships and apprenticeships click here.
This course trains novice operators in the skills required to enter the industry as a certified skid steer loader operator.
Entry Requirements
This course has basic PPE requirements (located under Important information)
LLN requirements:
Adequate literacy and numeracy skills to complete the written component of the assessment. If you have language, numeracy or literacy concerns, please discuss them with us before the course starts.
Jumpstart an electrifying career Complete this pre-apprenticeship and you'll have what employers are looking for in an apprentice automotive electrical technician.
Entry Requirements
School Leaver
Non-School Leaver
AQF
OLNA or NAPLAN 9 Band 8
C Grades in Year 10 English and Maths or equivalent
Certificate I or Certificate II
This qualification may be accessed by direct entry.
Electrical engineers tackle large-scale electrical challenges and develop innovative technologies that improve the quality of modern life.Our Graduate Diploma in Engineering (Electrical) is suited to engineering graduates and working engineers with relevant experience.
<div class="shortdescription font_museo500">
<p> This pre-apprenticeship is designed to give you an edge when competing for an apprenticeship in the fields of electrical, instrumentation and air conditioning/refrigeration.
</p>
</div>
<div class="shortdescription font_museo500">
<p> The Certificate III in Electrotechnology Electrician is designed to formally teach you the practical and theoretical components required to complement practical work as an electrical apprentice. </p>
</div>
Are you interested in working in the Electrotechnology industry? If the answer is yes, you could be on your way to possibly gaining an apprenticeship/traineeship.
This course provides training in selecting, installing, setting up, testing, fault finding, repairing and maintenance of electronic equipment and devices at component/sub-assembly level. There are elective options in radio frequency and security.
Entry Requirements
If you are entering this program as an apprentice/trainee you must: * be employed in industry * be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Australian Apprenticeship Centre (AAC) prior to enrolment.
This program has pre-requisite requirements as shown below. All prerequisites must be achieved. Discuss with a CIT teacher during enrolment to ensure you have met these requirements.
To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).
This course provides training in selecting, installing, setting up, testing, fault finding, repairing and maintenance of electronic equipment and devices at component/sub-assembly level. There are elective options in radio frequency and security.
Entry Requirements
If you are entering this course as an apprentice/trainee you must: - be employed in industry - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Australian Apprenticeship Centre (AAC) prior to enrolment.
This course has pre-requisite requirements as shown below. All prerequisites must be achieved. Discuss with a CIT teacher during enrolment to ensure you have met these requirements.
To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).
This course will provide you with the skills and knowledge required to repair and maintain the body of cars, heavy vehicles and other vehicles in the automotive industry.
Entry Requirements
If you are entering this course as an apprentice/trainee you must:
- be employed in the auto industry - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Apprentice Network Provider (ANP) prior to enrolment.
If you already have skills in this area, you may seek recognition for all or part of this course.
