Updating Results
Menu
Updating Results

Search Courses

Showing 95 items

  • South Metropolitan TAFE

    South Metropolitan TAFE

    Certificate I in Maritime Operations (General Purpose Hand Near Coastal)

    Certificate

    This qualification is suitable for people working in an entry level position in the maritime industry as a General Purpose Hand under the direct supervision of the master or engineer of a commercial vessel to: assist as a general hand on deck or in the engine room of a commercial vessel length as...

  • University of Southern Queensland (USQ)

    University of Southern Queensland (USQ)

    Bachelor of Engineering (Honours) (Mechanical Engineering)

    Bachelor

    Change the course of your life with USQ’s Bachelor of Engineering (Honours) (Mechanical).

    Entry Requirements

    11/77 OP/Rank This is the 2019 adjusted OP / Rank for this program. The lowest OP/unadjusted Rank* to which an offer was made is 13/71. OP/Ranks based upon all offers made in Semester 1, 2018. Entry Requirements Subject pre-requisites: English (4, SA), Mathematics B (4, SA) or equivalent Recommended study: Year 12 Physics (4SA) English Language Requirements You are required to satisfy the applicable English language requirements. This program requires a minimum of IELTS 6. 0 or equivalent. If you do not meet the English language requirements you may apply to study a University-approved English language program. Further admission information An adjusted Selection Rank is the result of combining additional ranks through special entry schemes for admission. Special entry schemes for admissions may help you get into the program of your choice by increasing your Selection Rank, through the allocation of additional ranks in certain circumstances. An adjusted Selection Rank is the result of combining additional ranks with a student's OP/Selection Rank. An unadjusted Selection Rank is the student's Selection Rank without any rank adjustments. USQ is committed to greater admissions transparency. Learn more about the education and work experience, as well as average OP/Ranks for this programs' student cohort for Semester 1, 2018. We can help

  • South Metropolitan TAFE

    South Metropolitan TAFE

    Diploma of Maritime Operations

    Diploma

    This certificate enables you to work as a Master or Chief mate on vessels less than 500 gross tonnage in any operating area and as Watchkeeper deck officer on vessels of any gross tonnage and in any operating area. Watchkeeper deck officer on ships of any gross tonnage in any operating area.

  • University of Southern Queensland (USQ)

    University of Southern Queensland (USQ)

    Bachelor of Engineering (Honours) (Mechanical Engineering)

    Bachelor (Honours)

    Change the course of your life with UniSQ's Bachelor of Engineering (Honours) (Mechanical). With the opportunity to study online or on-campus, you will have the flexibility to adapt your study to your life.

    Entry Requirements

    Entry requirements

    Find the entry requirements most relevant to you.

    Recent secondary education
    Adjusted
    Entry score including adjustment factors (additional points given in certain circumstances).
    		 Unadjusted
    Entry score not including adjustment factors.
    ATAR
    The Australian Tertiary Admission Rank (ATAR) is a percentile rank used to assess the results of high-school applicants for undergraduate entry into university.
    71.00
    80.00
    Pre-requisites
    • Subject pre-requisites: English (Units 3 & 4, C), Mathematical Methods (Units 3 & 4, C), or equivalent
    • Recommended prior study: Physics (Units 3 & 4, C), or equivalent
    Inherent requirements

    There are inherent requirements that must be met in order to successfully complete this degree. Inherent requirements are fundamental skills, capabilities and knowledge that students must be able to demonstrate in order to achieve the essential learning outcomes of the degree, while maintaining the academic integrity of the degree. Please read and understand the inherent requirements specific to the Bachelor of Engineering (Honours) before applying.

    If you think you may experience any problems meeting inherent requirements, you can talk to a Student Equity Officer about reasonable adjustments that may be put in place to assist you. Any reasonable adjustments made must not fundamentally change the nature of the inherent requirement.

    Further admission information

    Adjustments are additional points given in certain circumstances that may increase your Rank. Find out if you qualify for any adjustment factor pathways such as educational disadvantage where you live, and subjects you passed.

    UniSQ is committed to greater admissions transparency. Learn more about the education and work experience, as well as average Ranks for this degrees' student cohort from the previous year.

    Tafe (VET) qualification

    If you have completed a qualification from a TAFE or qualified private provider, you may be able to use these qualifications to meet UniSQ's entry requirements.

    Work and life experience

    You may be able to use your work experience and other adjustment factors to increase your selection rank and meet UniSQ's entry requirements.

    English language requirements

    You are required to satisfy the applicable English language requirements and this degree requires a minimum of IELTS 6.0 or equivalent. If you do not meet the English language requirements you may apply to study a University-approved English language program.

    Recognition of prior learning or work experience

    You may be eligible for recognition of prior learning if you have previously studied or have relevant work experience. This will help to reduce the number of courses that you need to study to finish your program.

    Pathways

    If you don't meet the entry requirements, we have pathway options available to you.

    If you identify as being of Aboriginal or Torres Strait Islander descent you may be eligible to enter the Indigenous Higher Education (IHEPP) program.

  • University of Melbourne

    University of Melbourne

    Master of Engineering (Mechanical with Business)

    Masters (Coursework)

    Design and build tomorrow's machines and systems with the business principles to help ensure their success with the Master of Engineering (Mechanical with Business) at Australia's leading university.* Gain skills in mechanical design, thermodynamics, fluid mechanics, and the business skills to...

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate III in Heavy Commercial Vehicle Mechanical Technology

    Certificate

    This qualification will provide you with the skills and knowledge to be competent in a range of Heavy Commercial Vehicle Mechanical roles. You will gain and apply a broad set of skills and knowledge on a variety of heavy commercial vehicles in the automotive mechanical service and repair sector.

    Entry Requirements

    Early in the course your skills will be assessed - if you cannot read and write documents and complete maths work to the level needed you will be enrolled into additional subjects to help you build the skills needed to successfully complete the course.

    If you are entering this program as an apprentice/trainee you must:
    - be employed in the auto industry
    - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Apprentice Network Provider (ANP) prior to enrolment.
    - If you already have skills in this area, you may seek recognition for all or part of this course.

  • University of Southern Queensland (USQ)

    University of Southern Queensland (USQ)

    Graduate Diploma of Engineering Science (Mechanical Engineering)

    Graduate Diploma

    USQ’s Graduate Diploma of Engineering Science (Mechanical Engineering) is ideal if you have a three year engineering degree and you want to extend your knowledge and practical experience in mechanical engineering.

    Entry Requirements

    Entry Requirements Australian university three or four-year Bachelor degree in engineering in the relevant specialisation, or equivalent. or Australian university four-year Bachelor degree in engineering in a non-related specialisation, or equivalent. English Language Requirements You are required to satisfy the applicable English language requirements. This program requires a minimum of IELTS 6. 5 or equivalent. If you do not meet the English language requirements you may apply to study a University-approved English language program. We can help

  • Flinders University

    Flinders University

    Master of Maritime Archaeology [2 years]

    Masters (Coursework)

    Find out about studying a Master of Maritime Archaeology [2 years] at Flinders University

    Entry Requirements

    Graduate Certificate

    Applicants for the graduate certificate must normally hold an approved degree or equivalent qualification from an approved tertiary institution.

    Graduate Diploma

    Applicants for the graduate diploma must normally hold an approved degree or equivalent qualification from an approved tertiary institution.

    Alternatively, applicants must have completed the Graduate Certificate in Maritime Archaeology from Flinders University.

    Masters

    Applicants must normally hold an approved bachelor degree (or equivalent qualification) from an approved tertiary institution.

    Masters (1.5 years)

    Applicants must normally hold a bachelor degree or equivalent qualification in Archaeology; or hold an approved Graduate Certificate or Graduate Diploma (or equivalent qualification) in Archaeology (or a closely related discipline) from an approved tertiary institution; or hold an approved Honours degree in Archaeology (or a closely related discipline).

  • Flinders University

    Flinders University

    Master of Maritime Archaeology (1.5 years)

    Masters (Coursework)

    Find out about studying a Master of Maritime Archaeology (1.5 years) at Flinders University

    Entry Requirements

    Graduate Certificate

    Applicants for the graduate certificate must normally hold an approved degree or equivalent qualification from an approved tertiary institution.

    Graduate Diploma

    Applicants for the graduate diploma must normally hold an approved degree or equivalent qualification from an approved tertiary institution.

    Alternatively, applicants must have completed the Graduate Certificate in Maritime Archaeology from Flinders University.

    Masters

    Applicants must normally hold an approved bachelor degree (or equivalent qualification) from an approved tertiary institution.

    Masters (1.5 years)

    Applicants must normally hold a bachelor degree or equivalent qualification in Archaeology; or hold an approved Graduate Certificate or Graduate Diploma (or equivalent qualification) in Archaeology (or a closely related discipline) from an approved tertiary institution; or hold an approved Honours degree in Archaeology (or a closely related discipline).

  • QUT (Queensland University of Technology)

    QUT (Queensland University of Technology)

    Master of Professional Engineering (Mechanical)

    Masters (Coursework)

    If you're passionate about mechanical engineering, this course lets you explore complex industry problems, boost your post-professional knowledge and future-proof your engineering career.

    Entry Requirements

    Mechanical major entry requirements 1.5-year program

    You must have a recognised four-year full-time (or equivalent) bachelor degree in the mechanical engineering discipline with a minimum GPA of 4.00 (on QUT's 7-point scale).

    2-year program

    You must have:

    • A recognised three-year full-time (or equivalent) bachelor degree of engineering or engineering technology in the mechanical engineering discipline with a minimum GPA of 4.00 (on QUT's 7-point scale); or
    • A recognised four-year full-time (or equivalent) bachelor degree in any other engineering discipline with a minimum GPA of 4.00 (on QUT's 7-point scale).
    Mechanical and management major entry requirements 1.5-year program

    You must have a recognised four-year full-time (or equivalent) bachelor degree in the mechanical engineering discipline with a minimum 4.00 (on QUT's 7-point scale)).

    2-year program

    You must have a recognised three-year full-time (or equivalent) bachelor degree of engineering or engineering technology in the mechanical engineering discipline with a minimum GPA of 4.00 (on QUT's 7-point scale).

    Opening of applications for 2024

    Applications for the 2024 February and July intakes will open 1 September 2023.

    Mechanical and mechanical and management streams - 1.5-year program

    You'll need:

    • a completed recognised four-year full-time equivalent bachelor degree in the mechanical engineering discipline with a minimum GPA of 4.0 (on QUT's 7 point scale).
    Mechanical stream - 2-year program

    You'll need a completed recognised full-time equivalent of either:

    • a three-year bachelor degree in mechanical engineering or engineering technology (in mechanical engineering) with a minimum GPA of 4.0 (on QUT's 7 point scale)
    • a four-year bachelor degree in any engineering discipline with a minimum GPA of 4.0 or higher (on QUT's 7 point scale).
    Mechanical and management stream - 2-year program

    You'll need:

    • a completed recognised three- or four-year full-time bachelor degree in mechanical engineering or engineering technology (in mechanical engineering) with a minimum GPA of 4.0 (on QUT's 7 point scale).

  • South Metropolitan TAFE

    South Metropolitan TAFE

    Advanced Diploma of Maritime Operations (Master Unlimited)

    Diploma

    Take command of your maritime career, become a master of the seas and rise to the top as the ship's most responsible officer.. This course will allow you to work in international waters as a: Master, Chief mate or Watchkeeper deck officer on ships of any gross tonnage in any operating area.

    Entry Requirements

    School Leaver Non-School Leaver AQF
    Completion of WACE General or ATAR (Minimum C Grades) or equivalent Completion of WACE General or ATAR or equivalent (minimum C Grades) Certificate III

    Prospective students should hold one of the following:

    • A Diploma of Maritime Operations (Watchkeeper Deck) or
    • A Diploma of Maritime Operations (Master less than 500 GT) or
    • A Master less than 80 metres near coastal.

    In addition to successful completion of Advanced Diploma of Maritime Operations (Master Unlimited), the Australian Maritime Safety Authority (AMSA) requires students to successfully complete each of the following to be issued with a new certificate of competency:

    • Meet medical test requirements
    • Completed qualifying sea service as an officer in charge of a navigational watch in accordance with AMSA requirements, see link below.
    • Pass a final assessment at an AMSA office

    People seeking certification should contact the marine regulators, Australian Maritime Safety Authority. Phone: (02) 6279 5000 (8.00am to 5.00pm, Monday to Friday EST) or visit the website

    .

  • University of Sydney (USYD)

    University of Sydney (USYD)

    Master of Engineering (Mechanical Engineering)

    Masters (Coursework)

    <p>Develop specialised technical knowledge in mechanical engineering, gaining an advanced understanding of the design of mechanical components, whole machines, mechanical systems and mechanical processes.

  • South Metropolitan TAFE

    South Metropolitan TAFE

    Diploma of Maritime Operations (Master less than 500 GT)

    Diploma

    This certificate enables you to work as a Master of a commercial vessel less than 500 gross tonnage in any operating area..

    Entry Requirements

    School Leaver Non-School Leaver AQF
    Completion of WACE General or ATAR (Minimum C Grades) or equivalent Completion of WACE General or ATAR or equivalent (minimum C Grades) Certificate III

    Prospective students should hold one of the following:

    • A Certificate IV in Maritime Operations (Master up to 35 metres Near Coastal) or
    • A Certificate III in Maritime Operations (Integrated Rating) with TAGS books and sea time or
    • An AMSA approved equivalent trade certificate.

    In addition to successful completion of the Diploma of Maritime Operations (Master up to 500GT), the Australian Maritime Safety Authority (AMSA) requires students to successfully complete each of the following to be issued with a new certificate of competency:

    • Meet medical test and eyesight requirements
    • Hold of the following: unrestricted Master less than 24 meter Near coastal Certificate of competency, watchkeeper deck less than 500 GT or unrestricted Master less than 35 meters near coastal.
    • Completed qualifying sea service time as an officer in charge on a navigation watch. Please refer to AMSA website below for further information
    • Pass an Orals Examination

    People seeking certification should contact the marine regulators, Australian Maritime Safety Authority. Phone: (02) 6279 5000 (8.00am to 5.00pm, Monday to Friday EST) or visit the website

    .