This qualification is suitable for people working in an entry level position in the maritime industry as a General Purpose Hand under the direct supervision of the master or engineer of a commercial vessel to: assist as a general hand on deck or in the engine room of a commercial vessel length as...
This certificate enables you to work as a Master or Chief mate on vessels less than 500 gross tonnage in any operating area and as Watchkeeper deck officer on vessels of any gross tonnage and in any operating area. Watchkeeper deck officer on ships of any gross tonnage in any operating area.
Take command of your maritime career, become a master of the seas and rise to the top as the ship's most responsible officer.. This course will allow you to work in international waters as a: Master, Chief mate or Watchkeeper deck officer on ships of any gross tonnage in any operating area.
Entry Requirements
School Leaver
Non-School Leaver
AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent
Completion of WACE General or ATAR or equivalent (minimum C Grades)
Certificate III
Prospective students should hold one of the following:
A Diploma of Maritime Operations (Watchkeeper Deck) or
A Diploma of Maritime Operations (Master less than 500 GT) or
A Master less than 80 metres near coastal.
In addition to successful completion of Advanced Diploma of Maritime Operations (Master Unlimited), the Australian Maritime Safety Authority (AMSA) requires students to successfully complete each of the following to be issued with a new certificate of competency:
Meet medical test requirements
Completed qualifying sea service as an officer in charge of a navigational watch in accordance with AMSA requirements, see link below.
Pass a final assessment at an AMSA office
People seeking certification should contact the marine regulators, Australian Maritime Safety Authority. Phone: (02) 6279 5000 (8.00am to 5.00pm, Monday to Friday EST) or visit the website
This certificate enables you to work as a Master of a commercial vessel less than 500 gross tonnage in any operating area..
Entry Requirements
School Leaver
Non-School Leaver
AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent
Completion of WACE General or ATAR or equivalent (minimum C Grades)
Certificate III
Prospective students should hold one of the following:
A Certificate IV in Maritime Operations (Master up to 35 metres Near Coastal) or
A Certificate III in Maritime Operations (Integrated Rating) with TAGS books and sea time or
An AMSA approved equivalent trade certificate.
In addition to successful completion of the Diploma of Maritime Operations (Master up to 500GT), the Australian Maritime Safety Authority (AMSA) requires students to successfully complete each of the following to be issued with a new certificate of competency:
Meet medical test and eyesight requirements
Hold of the following: unrestricted Master less than 24 meter Near coastal Certificate of competency, watchkeeper deck less than 500 GT or unrestricted Master less than 35 meters near coastal.
Completed qualifying sea service time as an officer in charge on a navigation watch. Please refer to AMSA website below for further information
Pass an Orals Examination
People seeking certification should contact the marine regulators, Australian Maritime Safety Authority. Phone: (02) 6279 5000 (8.00am to 5.00pm, Monday to Friday EST) or visit the website
Combine your passion for machines and engines with the marine industry and pursue your career as a chief engineer or second engineer on a vessel..
Entry Requirements
School Leaver
Non-School Leaver
AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent
Completion of WACE General or ATAR or equivalent (minimum C Grades)
Certificate III
Prospective students should hold one of the following:
A Certificate IV in Maritime Operations (Marine Engine Driver Grade 1 Near Coastal) or
An AMSA approved equivalent trade certificate
In addition to successful completion of the Diploma of Maritime Operations (Marine Engineering Class 3 near Coastal), the Australian Maritime Safety Authority (AMSA) requires students to successfully complete each of the following to be issued with a new certificate of competency:
Be at least 16 years old on the certificate issue date
Meet medical test and eyesight requirements
Hold a Marine engine driver grade 1 near coastal or workshop skill equivalent qualification.
Completed qualifying sea service time on a commercial vessel with inboard diesel engines with propulsion power greater than or equal to 400 kilowatts. Other requirements apply, please refer to AMSA website below for further information
Complete Basic Safety Training including security awareness
Pass a final assessment at an AMSA office
People seeking certification should contact the marine regulators, Australian Maritime Safety Authority website
Ready to navigate your crew through rough or smooth seas? Further advance your maritime career and become a highly skilled specialist in a supervisory role..
Entry Requirements
School Leaver
Non-School Leaver
AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent
Completion of WACE General or ATAR or equivalent (minimum C Grades)
Certificate III
Prospective students should hold one of the following:
A Certificate IV in Maritime Operations (Master up to 35 metres Near Coastal) or
A Certificate III in Maritime Operations (Integrated Rating) with TAGS books and sea time or
An AMSA approved equivalent trade certificate.
In addition to successful completion of this course, the Australian Maritime Safety Authority (AMSA) requires students to successfully complete each of the following to be issued with a new certificate of competency:
Meet medical test and eyesight requirements
Completed qualifying sea service time as either understudy of the officer in charge of a navigational watch or equivalent. Please refer to AMSA website below for further information
Pass a Final Assessment at an AMSA office.
Refer to the following information on the AMSA website
People seeking certification should contact the marine regulators, Australian Maritime Safety Authority. Phone: Head Office (02) 6279 5000 (8.00am to 5.00pm, Monday to Friday EST) or visit the website
Steer your career forward and advance to the supervisory role of Engineer Watchkeeper. This course will help you gain specialist skills to advance to the next level in your career..
Entry Requirements
School Leaver
Non-School Leaver
AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent
Completion of WACE General or ATAR or equivalent (minimum C Grades)
Certificate III
Prospective students should hold one of the following:
A Certificate IV in Maritime Operations (Marine Engine Driver Grade 1 Near Coastal) or
An AMSA approved equivalent trade certificate.
New students who have not studied MAR50120 Diploma of Marine Engineering (Engineer Class 3 Near Coastal) must apply instead for the Engineer class 3 qualification due to pre-requisite skills/knowledge requirements. Students that have already completed MAR50120 Diploma of Marine Engineering (Engineer Class 3 Near Coastal) are eligible to apply for a credit transfer to reduce the study load and overall course cost.
This unit involves the skills and knowledge required to recognise hazards associated with liquefied gas tankers (basic gas) and oil and chemical tankers (basic oil and chemical), and to apply appropriate hazard control measures to contribute to safe cargo operation..
This certificate allows you to perform the duties or functions of Master, Chief mate or Watchkeeper deck officer on ships of any gross tonnage in any operating area. This may potentially reduce the duration of the course up to 14 weeks. Find out more.
The Master of Offshore and Coastal Engineering prepares graduates from engineering backgrounds with the knowledge and practical skills to lead innovation in offshore and coastal engineering.
Entry Requirements
Admission requirements
If you're interested in furthering your career by studying this postgraduate course, find out the admission details below
Admission Requirements
To be considered for admission to this course an applicant must have- (a) a Master of Professional Engineering; or (b) a Bachelor of Engineering (Honours) degree, or an equivalent qualification, as recognised by UWA; and (b) the equivalent of a UWA weighted average mark of at least 65 per cent; and (c) prior studies in Civil Engineering; or Chemical Engineering or Environmental Engineering; or Mechanical Engineering; or Mining Engineering.
To be considered for admission to this course an applicant must have- (a) a Master of Professional Engineering; or (b) a Bachelor of Engineering (Honours) degree, or an equivalent qualification, as recognised by UWA; and (b) the equivalent of a UWA weighted average mark of at least 65 per cent; and (c) prior studies in Civil Engineering; or Chemical Engineering or Environmental Engineering; or Mechanical Engineering; or Mining Engineering.
Ranking and Selection Process
Where relevant, admission will be awarded to the highest ranked applicants or applicants selected based on the relevant requirements.
Where relevant, admission will be awarded to the highest ranked applicants or applicants selected based on the relevant requirements.
ADMISSION REQUIREMENT
English competency
English is the language of instruction and assessment at UWA and you will need to meet the English language requirements of the University to be eligible for a place.
Minimum overall IELTS score of 6.5, with no band less than 6.0.
Your health and safety is important to us. Spaces are limited in face-to-face classes to adhere to social distancing guidelines. Additional hygiene protocols will be implemented and other controls may apply.