Updating Results
Menu
Updating Results

Search Courses

Showing 131 items

  • CQUniversity Australia (CQU)

    CQUniversity Australia (CQU)

    Certificate II in Automotive Servicing Technology

    Certificate

    Upon successful completion of this course you will have the skills and knowledge required to perform servicing and maintenance of vehicles in an automotive service or repair business.

    Entry Requirements

    Completion of the bksb (Basic Key Skills Builder) online literacy and numeracy assessment prior to enrolment, unless the student has completed an equal or higher level course.

    There are no other entry requirements for this course.


  • University of Southern Queensland (USQ)

    University of Southern Queensland (USQ)

    Bachelor of Engineering (Honours) (Mechanical Engineering)

    Bachelor

    Change the course of your life with USQ’s Bachelor of Engineering (Honours) (Mechanical).

    Entry Requirements

    11/77 OP/Rank This is the 2019 adjusted OP / Rank for this program. The lowest OP/unadjusted Rank* to which an offer was made is 13/71. OP/Ranks based upon all offers made in Semester 1, 2018. Entry Requirements Subject pre-requisites: English (4, SA), Mathematics B (4, SA) or equivalent Recommended study: Year 12 Physics (4SA) English Language Requirements You are required to satisfy the applicable English language requirements. This program requires a minimum of IELTS 6. 0 or equivalent. If you do not meet the English language requirements you may apply to study a University-approved English language program. Further admission information An adjusted Selection Rank is the result of combining additional ranks through special entry schemes for admission. Special entry schemes for admissions may help you get into the program of your choice by increasing your Selection Rank, through the allocation of additional ranks in certain circumstances. An adjusted Selection Rank is the result of combining additional ranks with a student's OP/Selection Rank. An unadjusted Selection Rank is the student's Selection Rank without any rank adjustments. USQ is committed to greater admissions transparency. Learn more about the education and work experience, as well as average OP/Ranks for this programs' student cohort for Semester 1, 2018. We can help

  • TasTAFE

    TasTAFE

    Certificate II in Automotive Vocational Preparation

    Certificate

    Take the first steps towards getting started in your Automotive career with this entry-level pre-employment course in Automotive Vocational Preparation, and get the basic skills you need to seek employment within the automotive mechanical or autobody repair industry.

    Entry Requirements

    You will be required to undertake the Basic Knowledge Skills Builder (BKSB) to confirm you have the required Language, Literacy and Numeracy (LLN) skills to work at Australian Core Skills Framework (ACSF) exit level 2 or higher. Account details and instructions will be sent to you within 24 hours of applying. If you have previously undertaken the Literacy and Numeracy Assessment - we will review your results and notify you if further action is required.

  • Sunraysia Institute of TAFE

    Sunraysia Institute of TAFE

    Certificate II in Automotive Vocational Preparation

    Certificate

    If you're planning a career in the automotive industry, this course is the perfect place to start. The qualification will provide you with some of the basic skills and knowledge required for beginning either as a trainee or for work experience.

    Entry Requirements

    Applicants are required to undertake a Pre-Training Review to help confirm the course is suitable. All students will need to provide their own safety boots. All other personal protection equipment (PPE) is provided by SuniTAFE.

  • Sunraysia Institute of TAFE

    Sunraysia Institute of TAFE

    Certificate II in Automotive Servicing Technology

    Certificate

    This qualification reflects the role of individuals who perform a range of servicing tasks in the automotive retail, service and repair industry.

    Entry Requirements

    Applicants are required to undertake a Pre-Training Review to help confirm the course is suitable. Applicants enrolling as an Apprentice/Trainee must have a registered training contract.

  • South Metropolitan TAFE

    South Metropolitan TAFE

    Certificate II in Automotive Manufacturing Production - Bus, Truck and Trailer (Vehicle Body Building Pre-apprenticeship)

    Certificate

    Are you revved up for a body building career?. When you complete the Certificate II in Automotive Manufacturing Production - Bus, Truck and Trailer (Vehicle Body Building Pre-Apprenticeship) you'll have what employers are looking for in an apprentice vehicle body builder.

    Entry Requirements

    School Leaver Non-School Leaver AQF
    OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II
  • Chisholm Institute

    Chisholm Institute

    Certificate IV in Automotive Management

    Certificate

    Entry Requirements

    Applicants must complete the Basic Key Skills Builder (BKSB) assessment and achieve an outcome of ACSF exit level 2 - working level 3 for literacy and numeracy.

  • University of Southern Queensland (USQ)

    University of Southern Queensland (USQ)

    Bachelor of Engineering (Honours) (Mechanical Engineering)

    Bachelor (Honours)

    Change the course of your life with UniSQ's Bachelor of Engineering (Honours) (Mechanical). With the opportunity to study online or on-campus, you will have the flexibility to adapt your study to your life.

    Entry Requirements

    Entry requirements

    Find the entry requirements most relevant to you.

    Recent secondary education
    Adjusted
    Entry score including adjustment factors (additional points given in certain circumstances).
    		 Unadjusted
    Entry score not including adjustment factors.
    ATAR
    The Australian Tertiary Admission Rank (ATAR) is a percentile rank used to assess the results of high-school applicants for undergraduate entry into university.
    71.00
    80.00
    Pre-requisites
    • Subject pre-requisites: English (Units 3 & 4, C), Mathematical Methods (Units 3 & 4, C), or equivalent
    • Recommended prior study: Physics (Units 3 & 4, C), or equivalent
    Inherent requirements

    There are inherent requirements that must be met in order to successfully complete this degree. Inherent requirements are fundamental skills, capabilities and knowledge that students must be able to demonstrate in order to achieve the essential learning outcomes of the degree, while maintaining the academic integrity of the degree. Please read and understand the inherent requirements specific to the Bachelor of Engineering (Honours) before applying.

    If you think you may experience any problems meeting inherent requirements, you can talk to a Student Equity Officer about reasonable adjustments that may be put in place to assist you. Any reasonable adjustments made must not fundamentally change the nature of the inherent requirement.

    Further admission information

    Adjustments are additional points given in certain circumstances that may increase your Rank. Find out if you qualify for any adjustment factor pathways such as educational disadvantage where you live, and subjects you passed.

    UniSQ is committed to greater admissions transparency. Learn more about the education and work experience, as well as average Ranks for this degrees' student cohort from the previous year.

    Tafe (VET) qualification

    If you have completed a qualification from a TAFE or qualified private provider, you may be able to use these qualifications to meet UniSQ's entry requirements.

    Work and life experience

    You may be able to use your work experience and other adjustment factors to increase your selection rank and meet UniSQ's entry requirements.

    English language requirements

    You are required to satisfy the applicable English language requirements and this degree requires a minimum of IELTS 6.0 or equivalent. If you do not meet the English language requirements you may apply to study a University-approved English language program.

    Recognition of prior learning or work experience

    You may be eligible for recognition of prior learning if you have previously studied or have relevant work experience. This will help to reduce the number of courses that you need to study to finish your program.

    Pathways

    If you don't meet the entry requirements, we have pathway options available to you.

    If you identify as being of Aboriginal or Torres Strait Islander descent you may be eligible to enter the Indigenous Higher Education (IHEPP) program.

  • University of Melbourne

    University of Melbourne

    Master of Engineering (Mechanical with Business)

    Masters (Coursework)

    Design and build tomorrow's machines and systems with the business principles to help ensure their success with the Master of Engineering (Mechanical with Business) at Australia's leading university.* Gain skills in mechanical design, thermodynamics, fluid mechanics, and the business skills to...

  • Charles Darwin University (CDU)

    Charles Darwin University (CDU)

    Certificate III in Automotive Refinishing Technology

    Certificate

    This course is not available for online applications. Please contact the team on the details below for further information on how to apply.

    Entry Requirements

    To ensure you have the right skills and support to succeed in your course, a Language, Literacy, and Numeracy (LL&N) evaluation helps identify any areas where you may need additional support to help you achieve your goals.

    To gain entry into AUR32420 Certificate III in Automotive Refinishing Technology, candidates require:

    • To be an Apprentice who has entered a Training Contract with their employer and Australian Apprenticeship Support Network NT.
    • Understanding of basic computer skills, to navigate online learning materials and assessments.

    Students will also need to wear work clothing suited to the automotive industry such as:

    • Steel cap boots
    • Safety glasses
    • Protective clothing
    • Respirator
  • University of Technology, Sydney (UTS)

    University of Technology, Sydney (UTS)

    Master of Environmental Engineering Management

    Masters (Coursework)

    This course is designed to enable engineers and other technical specialists to take a leadership role in the field of environmental engineering and management.

  • University of Southern Queensland (USQ)

    University of Southern Queensland (USQ)

    Graduate Diploma of Engineering Science (Mechanical Engineering)

    Graduate Diploma

    USQ’s Graduate Diploma of Engineering Science (Mechanical Engineering) is ideal if you have a three year engineering degree and you want to extend your knowledge and practical experience in mechanical engineering.

    Entry Requirements

    Entry Requirements Australian university three or four-year Bachelor degree in engineering in the relevant specialisation, or equivalent. or Australian university four-year Bachelor degree in engineering in a non-related specialisation, or equivalent. English Language Requirements You are required to satisfy the applicable English language requirements. This program requires a minimum of IELTS 6. 5 or equivalent. If you do not meet the English language requirements you may apply to study a University-approved English language program. We can help

  • QUT (Queensland University of Technology)

    QUT (Queensland University of Technology)

    Master of Professional Engineering (Mechanical)

    Masters (Coursework)

    If you're passionate about mechanical engineering, this course lets you explore complex industry problems, boost your post-professional knowledge and future-proof your engineering career.

    Entry Requirements

    Mechanical major entry requirements 1.5-year program

    You must have a recognised four-year full-time (or equivalent) bachelor degree in the mechanical engineering discipline with a minimum GPA of 4.00 (on QUT's 7-point scale).

    2-year program

    You must have:

    • A recognised three-year full-time (or equivalent) bachelor degree of engineering or engineering technology in the mechanical engineering discipline with a minimum GPA of 4.00 (on QUT's 7-point scale); or
    • A recognised four-year full-time (or equivalent) bachelor degree in any other engineering discipline with a minimum GPA of 4.00 (on QUT's 7-point scale).
    Mechanical and management major entry requirements 1.5-year program

    You must have a recognised four-year full-time (or equivalent) bachelor degree in the mechanical engineering discipline with a minimum 4.00 (on QUT's 7-point scale)).

    2-year program

    You must have a recognised three-year full-time (or equivalent) bachelor degree of engineering or engineering technology in the mechanical engineering discipline with a minimum GPA of 4.00 (on QUT's 7-point scale).

    Opening of applications for 2024

    Applications for the 2024 February and July intakes will open 1 September 2023.

    Mechanical and mechanical and management streams - 1.5-year program

    You'll need:

    • a completed recognised four-year full-time equivalent bachelor degree in the mechanical engineering discipline with a minimum GPA of 4.0 (on QUT's 7 point scale).
    Mechanical stream - 2-year program

    You'll need a completed recognised full-time equivalent of either:

    • a three-year bachelor degree in mechanical engineering or engineering technology (in mechanical engineering) with a minimum GPA of 4.0 (on QUT's 7 point scale)
    • a four-year bachelor degree in any engineering discipline with a minimum GPA of 4.0 or higher (on QUT's 7 point scale).
    Mechanical and management stream - 2-year program

    You'll need:

    • a completed recognised three- or four-year full-time bachelor degree in mechanical engineering or engineering technology (in mechanical engineering) with a minimum GPA of 4.0 (on QUT's 7 point scale).

  • South Metropolitan TAFE

    South Metropolitan TAFE

    Certificate III in Automotive Refinishing Technology

    Certificate

    Build your career in the vehicle body repair industry When you complete the Certificate III in Automotive Refinishing Technology you'll be ready for a career in the vehicle body repair industry.

    Entry Requirements

    School Leaver Non-School Leaver AQF
    OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

    This course is available as an apprenticeship.

    Entrance requirements for apprenticeships

    You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship.

    An apprenticeship involves full time work with an employer who provides an opportunity to learn all aspects of a trade. This is a structured program for a fixed period of time and while you learn on the job, you also attend off the job training at SM TAFE.

    Some of the benefits of an Apprenticeship are that you can:

    • earn a wage while you train
    • learn on the job skills combined with off the job training
    • receive a nationally recognised qualification on successful completion
    • start a valuable step towards a rewarding career path
  • South Metropolitan TAFE

    South Metropolitan TAFE

    Certificate III in Automotive Body Repair Technology

    Certificate

    Are you looking for a body-building career?. When you complete the Certificate III in Automotive Body Repair Technology you'll be ready for a career in the vehicle body repair industry.

    Entry Requirements

    School Leaver Non-School Leaver AQF
    OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

    This course is available as an apprenticeship or traineeship.

    Entrance requirements for apprenticeships and traineeships

    You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship.

    An apprenticeship involves full time work with an employer who provides an opportunity to learn all aspects of a trade. This is a structured program for a fixed period of time and while you learn on the job, you also attend off the job training at SM TAFE.

    Some of the benefits of an Apprenticeship or Traineeship are that you can:

    • earn a wage while you train
    • learn on the job skills combined with off the job training
    • receive a nationally recognised qualification on successful completion
    • start a valuable step towards a rewarding career path