Updating Results
Menu
Updating Results

Search Courses

Showing 181 items

  • South Metropolitan TAFE

    South Metropolitan TAFE

    Certificate III in Civil Construction (Civil Construction General)

    Certificate

    Are you looking for a career in construction using the largest tools?. When you complete the Certificate III in Civil Construction (Civil Construction General) you'll be building a career as a mobile plant operator, bridge construction worker, pipe layer, or road construction worker.

    Entry Requirements

    School Leaver Non-School Leaver AQF
    OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

    This course is available as an apprenticeship.

    Entrance requirements for apprenticeships

    You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship.

    In a traineeship you also gain hands-on skills and work experience, and improve your employment prospects, while earning a wage. On successful completion you will gain a nationally recognised qualification which can lead to rewarding career options. The difference between a traineeship and an apprenticeship is that a traineeship can be either a full time or part time employment based training arrangement, usually for a nominal duration of 12 months or more, generally in a non-trade related area.

    To find out how to arrange a traineeship and study at South Metropolitan TAFE, please contact the Jobs and Skills Centre closest to you.

  • University of Southern Queensland (USQ)

    University of Southern Queensland (USQ)

    Bachelor of Engineering (Honours) (Mechanical Engineering)

    Bachelor

    Change the course of your life with USQ’s Bachelor of Engineering (Honours) (Mechanical).

    Entry Requirements

    11/77 OP/Rank This is the 2019 adjusted OP / Rank for this program. The lowest OP/unadjusted Rank* to which an offer was made is 13/71. OP/Ranks based upon all offers made in Semester 1, 2018. Entry Requirements Subject pre-requisites: English (4, SA), Mathematics B (4, SA) or equivalent Recommended study: Year 12 Physics (4SA) English Language Requirements You are required to satisfy the applicable English language requirements. This program requires a minimum of IELTS 6. 0 or equivalent. If you do not meet the English language requirements you may apply to study a University-approved English language program. Further admission information An adjusted Selection Rank is the result of combining additional ranks through special entry schemes for admission. Special entry schemes for admissions may help you get into the program of your choice by increasing your Selection Rank, through the allocation of additional ranks in certain circumstances. An adjusted Selection Rank is the result of combining additional ranks with a student's OP/Selection Rank. An unadjusted Selection Rank is the student's Selection Rank without any rank adjustments. USQ is committed to greater admissions transparency. Learn more about the education and work experience, as well as average OP/Ranks for this programs' student cohort for Semester 1, 2018. We can help

  • University of Southern Queensland (USQ)

    University of Southern Queensland (USQ)

    Associate Degree of Engineering (Civil Engineering)

    Associate Degree

    The Associate Degree of Engineering will give you the freedom of choice to start up your engineering career or set a stepping stone for further study. Study while you work, either externally or on-campus, and have the flexibility to adapt your study to your life.

    Entry Requirements

    Entry requirements

    Find the entry requirements most relevant to you.

    Recent secondary education
    Adjusted
    Entry score including adjustment factors (additional points given in certain circumstances).
    		 Unadjusted
    Entry score not including adjustment factors.
    ATAR
    The Australian Tertiary Admission Rank (ATAR) is a percentile rank used to assess the results of high-school applicants for undergraduate entry into university.
    62.70
    62.25
    Pre-requisites

    To study this degree we assume you have sound knowledge in:

    • English (Units 3 & 4, C), and
    • General Mathematics (Units 3 & 4, C)

    We assume that your knowledge is equivalent to a grade C or higher in Units 3 and 4 at high school level (typically studied in Year 12). Find out more about assumed knowledge.

    It is also recommended that you have studied Mathematical Methods (Units 3 & 4, C), or equivalent.

    Inherent requirements

    There are inherent requirements that must be met in order to successfully complete this degree. Inherent requirements are fundamental skills, capabilities and knowledge that students must be able to demonstrate in order to achieve the essential learning outcomes of the degree, while maintaining the academic integrity of the degree. Please read and understand the inherent requirements specific to the Associate Degree of Engineering before applying.

    If you think you may experience any problems meeting inherent requirements, you can talk to a Student Equity Officer about reasonable adjustments that may be put in place to assist you. Any reasonable adjustments made must not fundamentally change the nature of the inherent requirement.

    Further admission information

    Adjustments are additional points given in certain circumstances that may increase your Rank. Find out if you qualify for any adjustment factor pathways such as educational disadvantage where you live, and subjects you passed.

    UniSQ is committed to greater admissions transparency. Learn more about the education and work experience, as well as average Ranks for this degrees' student cohort from the previous year.

    Tafe (VET) qualification

    If you have completed a qualification from a TAFE or qualified private provider, you may be able to use these qualifications to meet UniSQ's entry requirements.

    Work and life experience

    You may be able to use your work experience and other adjustment factors to increase your selection rank and meet UniSQ's entry requirements.

    English language requirements

    You are required to satisfy the applicable English language requirements and this degree requires a minimum of IELTS 6.0 or equivalent. If you do not meet the English language requirements you may apply to study a University-approved English language program.

    Recognition of prior learning or work experience

    You may be eligible for recognition of prior learning if you have previously studied or have relevant work experience. This will help to reduce the number of courses that you need to study to finish your program.

    Pathways

    If you don't meet the entry requirements, we have pathway options available to you.

    If you identify as being of Aboriginal or Torres Strait Islander descent you may be eligible to enter the Indigenous Higher Education (IHEPP) program.

  • South Regional TAFE

    South Regional TAFE

    Diploma of Building Design

    Diploma

    When you complete this course, you will be ready for a career in building design. You will have the skills and knowledge to apply your skills to diverse building design projects.

    Entry Requirements

    School Leaver Non-School Leaver AQF
    Completion of WACE General or ATAR (Minimum C Grades) or equivalent Completion of WACE General or ATAR or equivalent (minimum C Grades) Certificate III

    Entry to this qualification is open to individuals who:

    • Hold CPP40115 Certificate IV Building Design Drafting or
    • CPP40121 Certificate IV Residential Drafting or
    • 52757WA Certificate IV in Residential Building Drafting
  • University of Melbourne

    University of Melbourne

    Master of Engineering (Structural)

    Masters (Coursework)

    Develop future large-scale projects with the Master of Engineering (Structural) at Australia's leading university*. Learn to design, plan and construct the advanced infrastructure required to handle increasing populations, finite resources and extreme events.

  • Flinders University

    Flinders University

    Graduate Diploma in Science (Water Resources Management)

    Graduate Diploma

    Find out about studying a Graduate Diploma in Science (Water Resources Management) at Flinders University

    Entry Requirements

    Graduate Certificate

    Applicants must normally hold an approved degree or equivalent qualification in a relevant discipline of science and engineering, from an approved tertiary institution.

    Graduate Diploma

    Applicants who do not hold the Graduate Certificate in Science (Water Resources Management) must normally hold an approved degree or equivalent qualification in a relevant discipline of science and engineering, from an approved tertiary institution.

    Masters

    Applicants who do not hold the Graduate Diploma in Science (Water Resources Management) must normally hold an approved degree or equivalent qualification in a relevant discipline of science and engineering, from an approved tertiary institution.

  • Flinders University

    Flinders University

    Master of Science (Water Resources Management)

    Masters (Coursework)

    Find out about studying a Master of Science (Water Resources Management) at Flinders University

    Entry Requirements

    Graduate Certificate

    Applicants must normally hold an approved degree or equivalent qualification in a relevant discipline of science and engineering, from an approved tertiary institution.

    Graduate Diploma

    Applicants who do not hold the Graduate Certificate in Science (Water Resources Management) must normally hold an approved degree or equivalent qualification in a relevant discipline of science and engineering, from an approved tertiary institution.

    Masters

    Applicants who do not hold the Graduate Diploma in Science (Water Resources Management) must normally hold an approved degree or equivalent qualification in a relevant discipline of science and engineering, from an approved tertiary institution.

  • Holmesglen Institute of TAFE

    Holmesglen Institute of TAFE

    Bachelor of Building Surveying

    Bachelor

    The Bachelor of Building Surveying is a four-year (equivalent) professional course designed to meet the needs of the building surveying industry. Entry is limited to students pathwaying from specific diplomas and advanced diplomas..No longer accepting new students into this course.

    Entry Requirements

    Holmesglen requires all students who wish to apply for this course to have completed one of the following courses:

    CPC50210 Diploma of Building and Construction
    22447VIC Advanced Diploma of Building Design (Architectural)
    CPC60115 Advanced Diploma of Building Surveying

    Prior to enrolment or commencement of this higher education program, you will be required to complete a literacy and numeracy assessment. This will assist with determining your suitability to the course, and identify any learning support needs.

  • University of Southern Queensland (USQ)

    University of Southern Queensland (USQ)

    Bachelor of Engineering (Honours) (Mechanical Engineering)

    Bachelor (Honours)

    Change the course of your life with UniSQ's Bachelor of Engineering (Honours) (Mechanical). With the opportunity to study online or on-campus, you will have the flexibility to adapt your study to your life.

    Entry Requirements

    Entry requirements

    Find the entry requirements most relevant to you.

    Recent secondary education
    Adjusted
    Entry score including adjustment factors (additional points given in certain circumstances).
    		 Unadjusted
    Entry score not including adjustment factors.
    ATAR
    The Australian Tertiary Admission Rank (ATAR) is a percentile rank used to assess the results of high-school applicants for undergraduate entry into university.
    71.00
    80.00
    Pre-requisites
    • Subject pre-requisites: English (Units 3 & 4, C), Mathematical Methods (Units 3 & 4, C), or equivalent
    • Recommended prior study: Physics (Units 3 & 4, C), or equivalent
    Inherent requirements

    There are inherent requirements that must be met in order to successfully complete this degree. Inherent requirements are fundamental skills, capabilities and knowledge that students must be able to demonstrate in order to achieve the essential learning outcomes of the degree, while maintaining the academic integrity of the degree. Please read and understand the inherent requirements specific to the Bachelor of Engineering (Honours) before applying.

    If you think you may experience any problems meeting inherent requirements, you can talk to a Student Equity Officer about reasonable adjustments that may be put in place to assist you. Any reasonable adjustments made must not fundamentally change the nature of the inherent requirement.

    Further admission information

    Adjustments are additional points given in certain circumstances that may increase your Rank. Find out if you qualify for any adjustment factor pathways such as educational disadvantage where you live, and subjects you passed.

    UniSQ is committed to greater admissions transparency. Learn more about the education and work experience, as well as average Ranks for this degrees' student cohort from the previous year.

    Tafe (VET) qualification

    If you have completed a qualification from a TAFE or qualified private provider, you may be able to use these qualifications to meet UniSQ's entry requirements.

    Work and life experience

    You may be able to use your work experience and other adjustment factors to increase your selection rank and meet UniSQ's entry requirements.

    English language requirements

    You are required to satisfy the applicable English language requirements and this degree requires a minimum of IELTS 6.0 or equivalent. If you do not meet the English language requirements you may apply to study a University-approved English language program.

    Recognition of prior learning or work experience

    You may be eligible for recognition of prior learning if you have previously studied or have relevant work experience. This will help to reduce the number of courses that you need to study to finish your program.

    Pathways

    If you don't meet the entry requirements, we have pathway options available to you.

    If you identify as being of Aboriginal or Torres Strait Islander descent you may be eligible to enter the Indigenous Higher Education (IHEPP) program.

  • University of Melbourne

    University of Melbourne

    Master of Engineering (Mechanical with Business)

    Masters (Coursework)

    Design and build tomorrow's machines and systems with the business principles to help ensure their success with the Master of Engineering (Mechanical with Business) at Australia's leading university.* Gain skills in mechanical design, thermodynamics, fluid mechanics, and the business skills to...

  • Griffith University

    Griffith University

    Master of Civil Engineering Advanced

    Masters (Coursework)

    This program provides students with advanced study across the breadth of specialisations in Civil Engineering. It is designed to extend and deepen the knowledge and skills gained from an undergraduate degree in civil engineering.

    Entry Requirements

    To be eligible for admission to Master of Civil Engineering Advanced, a student must hold:

    • a Bachelor degree in Civil Engineering or equivalent three year or four year Civil Engineering undergraduate degree from a recognised university (or another tertiary education institution of equivalent standing)
    • OR a Bachelor Honours degree in Civil Engineering or equivalent four year Civil Engineering undergraduate degree from a recognised university (or another tertiary education institution of equivalent standing)
    • OR a Graduate Certificate in Civil Engineering.

    Students admitted to the program with a Bachelor Honours degree in Civil Engineering or equivalent four year Engineering undergraduate degree or a Graduate Certificate in Civil Engineering will be eligible for 40 credit points of advanced standing towards the program. The following degrees are considered to be equivalent to a Bachelor honours degree in Engineering:

    • four year Engineering undergraduate degree that includes a significant final year research project component (i.e. one semester thesis) from an Australian university
    • four year Engineering undergraduate degree that includes a significant final year research project component (i.e. one semester thesis) from a NOOSR Section 1 University.

    Students currently enrolled in the Master of Civil Engineering (5642) will be eligible to transfer to the Master of Civil Engineering Advanced prior to graduation. Graduates of the Master of Civil Engineering (5642) are not eligible for admission to this program.

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate III in Heavy Commercial Vehicle Mechanical Technology

    Certificate

    This qualification will provide you with the skills and knowledge to be competent in a range of Heavy Commercial Vehicle Mechanical roles. You will gain and apply a broad set of skills and knowledge on a variety of heavy commercial vehicles in the automotive mechanical service and repair sector.

    Entry Requirements

    Early in the course your skills will be assessed - if you cannot read and write documents and complete maths work to the level needed you will be enrolled into additional subjects to help you build the skills needed to successfully complete the course.

    If you are entering this program as an apprentice/trainee you must:
    - be employed in the auto industry
    - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Apprentice Network Provider (ANP) prior to enrolment.
    - If you already have skills in this area, you may seek recognition for all or part of this course.

  • Griffith University

    Griffith University

    Master of Civil Engineering/Master of Engineering Project Management

    Masters (Coursework)

    The Master of Civil Engineering/Master of Engineering Project Management provides students with advanced study across the breadth of specialisations in Civil Engineering and Project Management.

    Entry Requirements

    To be eligible for admission to Master of Civil Engineering/Master of Engineering Project Management, a student must hold:

    • a Bachelor degree in Civil Engineering or equivalent three-year or four-year Civil Engineering undergraduate degree from a recognised university (or another tertiary education institution of equivalent standing);
    • OR a Bachelor Honours degree in Civil Engineering or equivalent four-year Civil Engineering undergraduate degree from a recognised university (or another tertiary education institution of equivalent standing).

    Notwithstanding the amount of credit which may be given towards a Masters degree, a student will be required to complete 60 credit points of courses from each of the degree programs in order to be awarded the double degree.

    Note: Only graduates of civil engineering will be admitted to this program due to its focus on technical design. The program is, therefore, not suitable to other engineering graduates.