Updating Results
Menu
Updating Results

Search Courses

Showing 67 items

  • South Metropolitan TAFE

    South Metropolitan TAFE

    Diploma of Engineering - Technical

    Diploma

    Have you got a keen eye for drafting and design, and want to make your mark in the world of mechanics and machines? Reach the next level of your dream career in Engineering with this technically advanced qualification, which is recognised Australia-wide..

    Entry Requirements

    School Leaver Non-School Leaver AQF
    Completion of WACE General or ATAR (Minimum C Grades) or equivalent Completion of WACE General or ATAR or equivalent (minimum C Grades) Certificate III

    This course is also available as a traineeship.

    Entrance requirements for traineeships

    You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship.

    In a traineeship you also gain hands-on skills and work experience, and improve your employment prospects, while earning a wage. On successful completion you will gain a nationally recognised qualification which can lead to rewarding career options. The difference between a traineeship and an apprenticeship is that a traineeship can be either a full time or part time employment based training arrangement, usually for a nominal duration of 12 months or more, generally in a non-trade related area.

    To find out how to arrange a traineeship and study at South Metropolitan TAFE, please contact the Jobs and Skills Centre closest to you.

    Entrance requirements for part-time study

    You must have a trade certificate (minimum Certificate III) or an overseas graduate certificate to qualify for this course.

  • South Metropolitan TAFE

    South Metropolitan TAFE

    Certificate II in Automotive Manufacturing Production - Bus, Truck and Trailer (Vehicle Body Building Pre-apprenticeship)

    Certificate

    Are you revved up for a body building career?. When you complete the Certificate II in Automotive Manufacturing Production - Bus, Truck and Trailer (Vehicle Body Building Pre-Apprenticeship) you'll have what employers are looking for in an apprentice vehicle body builder.

    Entry Requirements

    School Leaver Non-School Leaver AQF
    OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II
  • Central Regional TAFE

    Central Regional TAFE

    Certificate II in Automotive Vocational Preparation

    Certificate

    Launch your career in Automotives!. With this Certificate II you will learn to identify and inspect mechanical and electrical components as well as systems of light vehicles, heavy vehicles and outdoor power equipment.

    Entry Requirements

    School Leaver Non-School Leaver AQF
    OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II
    RTO Entry Requirements

    Completed Year 10 English and Maths.
  • South Metropolitan TAFE

    South Metropolitan TAFE

    Certificate IV in Autonomous Control and Remote Operations

    Certificate

    Do you want to become an engineering specialist in the well-paid field of automation, which is rapidly on the rise across the industries?.

    Entry Requirements

    School Leaver Non-School Leaver AQF
    C Grades in Year 11 WACE General English, and OLNA; or NAPLAN 9 Band 8 C Grades in Year 11 English and Maths or equivalent Certificate II or Certificate III
  • South Metropolitan TAFE

    South Metropolitan TAFE

    Certificate III in Automotive Refinishing Technology

    Certificate

    Build your career in the vehicle body repair industry When you complete the Certificate III in Automotive Refinishing Technology you'll be ready for a career in the vehicle body repair industry.

    Entry Requirements

    School Leaver Non-School Leaver AQF
    OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

    This course is available as an apprenticeship.

    Entrance requirements for apprenticeships

    You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship.

    An apprenticeship involves full time work with an employer who provides an opportunity to learn all aspects of a trade. This is a structured program for a fixed period of time and while you learn on the job, you also attend off the job training at SM TAFE.

    Some of the benefits of an Apprenticeship are that you can:

    • earn a wage while you train
    • learn on the job skills combined with off the job training
    • receive a nationally recognised qualification on successful completion
    • start a valuable step towards a rewarding career path
  • South Metropolitan TAFE

    South Metropolitan TAFE

    Certificate III in Automotive Body Repair Technology

    Certificate

    Are you looking for a body-building career?. When you complete the Certificate III in Automotive Body Repair Technology you'll be ready for a career in the vehicle body repair industry.

    Entry Requirements

    School Leaver Non-School Leaver AQF
    OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

    This course is available as an apprenticeship or traineeship.

    Entrance requirements for apprenticeships and traineeships

    You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship.

    An apprenticeship involves full time work with an employer who provides an opportunity to learn all aspects of a trade. This is a structured program for a fixed period of time and while you learn on the job, you also attend off the job training at SM TAFE.

    Some of the benefits of an Apprenticeship or Traineeship are that you can:

    • earn a wage while you train
    • learn on the job skills combined with off the job training
    • receive a nationally recognised qualification on successful completion
    • start a valuable step towards a rewarding career path
  • South Metropolitan TAFE

    South Metropolitan TAFE

    Certificate III in Automotive Manufacturing Technical Operations - Bus, Truck and Trailer

    Certificate

    Build your career in vehicle construction and repair Vehicle construction and repair is a diverse trade requiring a broad range of skills.

    Entry Requirements

    School Leaver Non-School Leaver AQF
    OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

    This course is available as an apprenticeship.

    Entrance requirements for apprenticeships

    You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship.

    An apprenticeship involves full time work with an employer who provides an opportunity to learn all aspects of a trade. This is a structured program for a fixed period of time and while you learn on the job, you also attend off the job training at SM TAFE.

    Some of the benefits of an Apprenticeship are that you can:

    • earn a wage while you train
    • learn on the job skills combined with off the job training
    • receive a nationally recognised qualification on successful completion
    • start a valuable step towards a rewarding career path

  • North Metropolitan TAFE

    North Metropolitan TAFE

    Certificate III in Light Vehicle Mechanical Technology

    Certificate

    Fine tune your automotive career The Certificate III in Light Vehicle Mechanical Technology will see you qualified as a Light Vehicle Automotive Service and Repair Technician working on the mechanical parts of motor vehicles, including the engine, transmission and suspension systems in the...

  • South Metropolitan TAFE

    South Metropolitan TAFE

    Certificate III in Light Vehicle Mechanical Technology

    Certificate

    When you complete the Certificate III in Light Vehicle Mechanical Technology you'll be ready for a career in the automotive servicing industry.. Learn in specialised facilities South Metropolitan TAFE's Carlisle Campus is WA's major centre for automotive and panel beating studies.

    Entry Requirements

    School Leaver Non-School Leaver AQF
    OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

    This course is available as an apprenticeship.

    Entrance requirements for apprenticeships

    You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship.

    An apprenticeship involves full time work with an employer who provides an opportunity to learn all aspects of a trade. This is a structured program for a fixed period of time and while you learn on the job, you also attend off the job training at SM TAFE.

    Some of the benefits of an Apprenticeship are that you can:

    • earn a wage while you train
    • learn on the job skills combined with off the job training
    • receive a nationally recognised qualification on successful completion
    • start a valuable step towards a rewarding career path
  • South Metropolitan TAFE

    South Metropolitan TAFE

    Certificate II in Automotive Air Conditioning Technology

    Certificate

    When you complete the Certificate II in Automotive Air Conditioning Technology you'll have what employers are looking for as an apprentice automotive air conditioning specialist..

    Entry Requirements

    School Leaver Non-School Leaver AQF
    OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

    To study this course you must have the following pre-requisites:

    • trade certificate (Automotive)
    • current automotive apprentice (at least third year)
    • you must obtain a Classroom (CL000) OR Trainee (TL000) Refrigeration and Air-Conditioning Trainee Licence through the Australian Refrigeration Council before you can attend workshop training at SM TAFE. Please allow up to seven days to obtain this. More information can be found at www.arctick.org
    About the Refrigeration and Air-Conditioning Trainee Licence

    Two types of trainee licence are available:

    • Trainee (TL000 Refrigeration and Air-Conditioning Trainee License)
      For supervised handling of refrigerant in workplace and classroom, this license is preferred. The supervisor must be the holder of a licence that entitles them to engage in work for which the licensee is being trained.
    • Trainee classroom (CL000 Refrigeration and Air-Conditioning Trainee License - Classroom)
      For handling of refrigeration in classroom only. The licensee cannot handle refrigerant outside the classroom setting. This license type requires a signed Trainers Declaration received after enrolment and payment.
  • South Regional TAFE

    South Regional TAFE

    Certificate II in Automotive Servicing Technology (Light Vehicle Servicing Pre-apprenticeship)

    Certificate

    This qualification will provide you with skills and knowledge used in the automotive vehicle servicing sector.

    Entry Requirements

    School Leaver Non-School Leaver AQF
    OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

    This course is Competitive at selected campuses and further Entrance Requirements may apply.

  • South Metropolitan TAFE

    South Metropolitan TAFE

    Certificate III in Engineering - Technical

    Certificate

    Are you ready to engineer a mechanically technical career?. Join an industry that is continually growing and evolving with new technologies!

    Entry Requirements

    School Leaver Non-School Leaver AQF
    OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

    This course is available as a traineeship.

    Entrance requirements for traineeships

    You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship.

    In a traineeship you also gain hands-on skills and work experience, and improve your employment prospects, while earning a wage. On successful completion you will gain a nationally recognised qualification which can lead to rewarding career options. The difference between a traineeship and an apprenticeship is that a traineeship can be either a full time or part time employment based training arrangement, usually for a nominal duration of 12 months or more, generally in a non-trade related area.

    To find out how to arrange a traineeship and study at South Metropolitan TAFE, please contact the Jobs and Skills Centre closest to you.

  • South Metropolitan TAFE

    South Metropolitan TAFE

    Certificate IV in Engineering (Instrumentation)

    Certificate

    Are you working in the engineering industry and looking to advance your career further?.

    Entry Requirements

    School Leaver Non-School Leaver AQF
    C Grades in Year 11 WACE General English, and OLNA; or NAPLAN 9 Band 8 C Grades in Year 11 English and Maths or equivalent Certificate II or Certificate III

    This course is available as a traineeship.

    Entrance requirements for traineeships

    You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship.

    In a traineeship you also gain hands-on skills and work experience, and improve your employment prospects, while earning a wage. On successful completion you will gain a nationally recognised qualification which can lead to rewarding career options. The difference between a traineeship and an apprenticeship is that a traineeship can be either a full time or part time employment based training arrangement, usually for a nominal duration of 12 months or more, generally in a non-trade related area.

    To find out how to arrange a traineeship and study at South Metropolitan TAFE, please contact the Jobs and Skills Centre closest to you.

  • The University of Western Australia (UWA)

    The University of Western Australia (UWA)

    Master of Professional Engineering

    Masters (Coursework)

    Specialise in one of eight engineering disciplines in the Master of Professional Engineering and become a professionally accredited engineer who is highly sought after by industry.

    Entry Requirements

    Admission requirements

    If you're interested in furthering your career by studying this postgraduate course, find out the admission details below

    Admission Requirements
    To be considered for admission to this course an applicant must have-
    (a) a UWA bachelor's degree with a major in MJD-ENGSC Engineering Science1 or Bachelor of Automation and Robotics; or
    (b) a bachelor's degree, or an equivalent qualification, as recognised by UWA; and
    (i) the equivalent of a UWA weighted average mark of at least 65 per cent; and
    (ii) prior studies in engineering, physics or mathematics;
    or
    (c) completed units in the Master of Professional Engineering Preliminary course at UWA as prescribed by the School of Engineering;
    or
    (d) completed a UWA Diploma in Science with a major in MJD-ENGSC Engineering Science1.
    (e) Students entering this course having completed the Bachelor of Engineering (Honours) at this university, or having completed an equivalent Engineers Australia accredited course as determined by the University, may not undertake a specialisation in a disciplinary field corresponding to the major they completed in their prior degree.
    1 Students are required to achieve a course weighted average mark of at least 50 per cent in their bachelor's degree or a weighted average mark of at least 50 per cent in the Level 3 units of the Engineering Science major.
    Admission Requirements
    To be considered for admission to this course an applicant must have-
    (a) a UWA bachelor's degree with a major in MJD-ENGSC Engineering Science1 or Bachelor of Automation and Robotics; or
    (b) a bachelor's degree, or an equivalent qualification, as recognised by UWA; and
    (i) the equivalent of a UWA weighted average mark of at least 65 per cent; and
    (ii) prior studies in engineering, physics or mathematics;
    or
    (c) completed units in the Master of Professional Engineering Preliminary course at UWA as prescribed by the School of Engineering;
    or
    (d) completed a UWA Diploma in Science with a major in MJD-ENGSC Engineering Science1.
    (e) Students entering this course having completed the Bachelor of Engineering (Honours) at this university, or having completed an equivalent Engineers Australia accredited course as determined by the University, may not undertake a specialisation in a disciplinary field corresponding to the major they completed in their prior degree.
    1 Students are required to achieve a course weighted average mark of at least 50 per cent in their bachelor's degree or a weighted average mark of at least 50 per cent in the Level 3 units of the Engineering Science major.
    Ranking and Selection Process
    Where relevant, admission will be awarded to the highest ranked applicants or applicants selected based on the relevant requirements.
    Ranking and Selection Process

    Where relevant, admission will be awarded to the highest ranked applicants or applicants selected based on the relevant requirements.

    ADMISSION REQUIREMENT
    English competency

    English is the language of instruction and assessment at UWA and you will need to meet the English language requirements of the University to be eligible for a place.

    Minimum overall IELTS score of 6.5, with no band less than 6.0.

    ADMISSION REQUIREMENT
    English competency
    Notice for Engineering Students
    The School of Engineering accepts placement hours accrued through WIL and SVLG units/micro-credentials towards the Engineering Professional Practicum, to a maximum of 100 hours.
    Notice for Engineering Students
  • South Regional TAFE

    South Regional TAFE

    Certificate III in Automotive Electrical Technology

    Certificate

    When you complete this course you will be ready for a career in the automotive industry. You will have the skills and knowledge to service, diagnose and repair electrical systems and components in vehicles in the automotive electrical service and repair industry.

    Entry Requirements

    Students wishing to undertake a Traineeship, or an Apprenticeship must be employed in a training contract by an appropriate organisation to study. To find out more regarding Traineeships and apprenticeships click here.