Want to work on international engineering projects?. Gain advanced skills in the design and drafting of engineering plans to Australian and New Zealand standards and you could be working on local, interstate or international engineering projects.
Become an energy champion with a Graduate Certificate in Energy and Carbon Studies. Help address climate change by developing your knowledge and skills in renewable and sustainable energy, as well as carbon and energy management.
Entry Requirements
Recognised Bachelor's degree (AQF Level 7) or higher, or equivalent training, or satisfactory preparation for the course through previous study or professional experience. Some of the units taken assume some prior knowledge, details of which are given in the description of each unit in the Handbook. The most common of these is the high school Physics prerequisite for units such as Energy in Society, Energy Management, and Energy Systems. Some students may therefore need to complete additional prerequisite units.
This qualification is suitable for people working in an entry level position in the maritime industry as a General Purpose Hand under the direct supervision of the master or engineer of a commercial vessel to: assist as a general hand on deck or in the engine room of a commercial vessel length as...
Are you looking for a career in construction using the largest tools?. When you complete the Certificate III in Civil Construction (Civil Construction General) you'll be building a career as a mobile plant operator, bridge construction worker, pipe layer, or road construction worker.
Entry Requirements
School Leaver
Non-School Leaver
AQF
OLNA or NAPLAN 9 Band 8
C Grades in Year 10 English and Maths or equivalent
Certificate I or Certificate II
This course is available as an apprenticeship.
Entrance requirements for apprenticeships
You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship.
In a traineeship you also gain hands-on skills and work experience, and improve your employment prospects, while earning a wage. On successful completion you will gain a nationally recognised qualification which can lead to rewarding career options. The difference between a traineeship and an apprenticeship is that a traineeship can be either a full time or part time employment based training arrangement, usually for a nominal duration of 12 months or more, generally in a non-trade related area.
To find out how to arrange a traineeship and study at South Metropolitan TAFE, please contact the Jobs and Skills Centre closest to you.
This certificate enables you to work as a Master or Chief mate on vessels less than 500 gross tonnage in any operating area and as Watchkeeper deck officer on vessels of any gross tonnage and in any operating area. Watchkeeper deck officer on ships of any gross tonnage in any operating area.
Have you got a keen eye for drafting and design, and want to make your mark in the world of mechanics and machines? Reach the next level of your dream career in Engineering with this technically advanced qualification, which is recognised Australia-wide..
Entry Requirements
School Leaver
Non-School Leaver
AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent
Completion of WACE General or ATAR or equivalent (minimum C Grades)
Certificate III
This course is also available as a traineeship.
Entrance requirements for traineeships
You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship.
In a traineeship you also gain hands-on skills and work experience, and improve your employment prospects, while earning a wage. On successful completion you will gain a nationally recognised qualification which can lead to rewarding career options. The difference between a traineeship and an apprenticeship is that a traineeship can be either a full time or part time employment based training arrangement, usually for a nominal duration of 12 months or more, generally in a non-trade related area.
To find out how to arrange a traineeship and study at South Metropolitan TAFE, please contact the Jobs and Skills Centre closest to you.
Entrance requirements for part-time study
You must have a trade certificate (minimum Certificate III) or an overseas graduate certificate to qualify for this course.
Are you revved up for a body building career?. When you complete the Certificate II in Automotive Manufacturing Production - Bus, Truck and Trailer (Vehicle Body Building Pre-Apprenticeship) you'll have what employers are looking for in an apprentice vehicle body builder.
Entry Requirements
School Leaver
Non-School Leaver
AQF
OLNA or NAPLAN 9 Band 8
C Grades in Year 10 English and Maths or equivalent
Launch your career in Automotives!. With this Certificate II you will learn to identify and inspect mechanical and electrical components as well as systems of light vehicles, heavy vehicles and outdoor power equipment.
Entry Requirements
School Leaver
Non-School Leaver
AQF
OLNA or NAPLAN 9 Band 8
C Grades in Year 10 English and Maths or equivalent
Enter the surveying industry with this qualification and become work-ready for roles such as surveying assistant and spatial information services assistant.
Entry Requirements
An IELTS score (academic) of 6.0 with no band score less than 5.0 or equivalent.
Equivalent to Australian Year 11 with a ""C"" grade in Maths.
Please view Admission requirements for your country of origin.
Start your pathway to an exciting career in civil construction and urban planning. During this course you will develop skills to work autonomously to plan and determine the selection of equipment, and roles and techniques for site specific work designs to meet client's site requirements.
Entry Requirements
An IELTS score (academic) of 6.0 with no band score less than 5.0 or equivalent.
Equivalent to Australian Year 12 with a pass in Year 11 Maths is required for entry into this course.
OR Completion of MEM30505 Certificate III in Engineering - Technical or MEM30522 Certificate III in Engineering - Technical is required for entry into this course.
Please view Admission requirements for your country of origin.
Start your career in engineering drafting, or as an engineering associate, with this entry level qualification.During this six month course you will become familiar with computer-aided design (CAD) packages, AutoCAD and how to set out engineering drawings according to Australian Standards.You will...
Entry Requirements
An IELTS score (academic) of 6.0 with no band score less than 5.0 or equivalent.
Equivalent to Australian Year 10 is required for entry into this course at South Metropolitan TAFE.
Equivalent to Australian Year 11 with passes in Maths is required for entry into this course at the North Metropolitan TAFE.
Please view Admission requirements for your country of origin.
Take your electrical engineering career to the next level with this qualification.
Entry Requirements
An IELTS score (academic) of 6.0 with no band score less than 5.0 or equivalent.
Equivalent to Australian Year 12 with a pass in Year 11 Maths is required for entry into this course.
OR Completion of MEM30505 Certificate III in Engineering - Technical or MEM30522 Certificate III in Engineering - Technical is required for entry into this course.
Please view Admission requirements for your country of origin.
Are you looking to advance your career in engineering? A Master of Engineering Practice is for you. Upskill in emerging areas such as renewable and sustainable energy, environmental and sustainable systems, intelligent and autonomous systems, and industrial control.
Entry Requirements
Entry may be gained through either of the following means into the Master of Engineering Practice: 1. Successful completion of a four-year Engineering degree accredited by Engineers Australia (or equivalent Washington Accord-recognised degree) in an approved field of Engineering, * 2. Successful completion of a Bachelor's degree (AQF Level 7, non-Washington Accord), or an equivalent qualification, as recognised by Murdoch University, which includes prior studies in Engineering or Engineering Technology, * Advanced standing for any students with existing studies would be considered on a case-by-case basis through the standard advanced standing processes at Murdoch. *Entry into each major is subject to different approved field of Engineering and cognate degrees
This qualification reflects the role of an individual working as a senior civil works designer or a para-professional designer, who supports professional engineers. They perform tasks that are broad, specialised, complex and technical and include strategic areas and initiating activities.
Entry Requirements
Must be 18 years of age or over
Must have completed Year 12 or equivalent
Must possess sound computer skills
Minimum 5.5 IELTS score & above or equivalent or KCBT placement test.
(Those students who do not meet the minimum English requirement will need to package this program with an English Course before proceeding to this qualification).
As a doctoral research degree candidate, you will uncover new knowledge either by the discovery of new facts, the formulation of theories or the innovative reinterpretation of known data and established ideas.
As a doctoral research degree candidate, you will uncover new knowledge either by the discovery of new facts, the formulation of theories or the innovative reinterpretation of known data and established ideas.
Engineering managers combine management expertise with engineering knowledge to lead teams of specialists who may work on highly technical tasks. An engineering manager's role may focus more on the processes and procedures of project realisation and on budgets, rather than technical input.
