This qualification is suitable for people working in an entry level position in the maritime industry as a General Purpose Hand under the direct supervision of the master or engineer of a commercial vessel to: assist as a general hand on deck or in the engine room of a commercial vessel length as...
Are you looking for a career in construction using the largest tools?. When you complete the Certificate III in Civil Construction (Civil Construction General) you'll be building a career as a mobile plant operator, bridge construction worker, pipe layer, or road construction worker.
Entry Requirements
School Leaver
Non-School Leaver
AQF
OLNA or NAPLAN 9 Band 8
C Grades in Year 10 English and Maths or equivalent
Certificate I or Certificate II
This course is available as an apprenticeship.
Entrance requirements for apprenticeships
You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship.
In a traineeship you also gain hands-on skills and work experience, and improve your employment prospects, while earning a wage. On successful completion you will gain a nationally recognised qualification which can lead to rewarding career options. The difference between a traineeship and an apprenticeship is that a traineeship can be either a full time or part time employment based training arrangement, usually for a nominal duration of 12 months or more, generally in a non-trade related area.
To find out how to arrange a traineeship and study at South Metropolitan TAFE, please contact the Jobs and Skills Centre closest to you.
When you complete this course, you will be ready for a career in building design. You will have the skills and knowledge to apply your skills to diverse building design projects.
Entry Requirements
School Leaver
Non-School Leaver
AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent
Completion of WACE General or ATAR or equivalent (minimum C Grades)
Certificate III
Entry to this qualification is open to individuals who:
Hold CPP40115 Certificate IV Building Design Drafting or
CPP40121 Certificate IV Residential Drafting or
52757WA Certificate IV in Residential Building Drafting
This certificate enables you to work as a Master or Chief mate on vessels less than 500 gross tonnage in any operating area and as Watchkeeper deck officer on vessels of any gross tonnage and in any operating area. Watchkeeper deck officer on ships of any gross tonnage in any operating area.
Have you got a keen eye for drafting and design, and want to make your mark in the world of mechanics and machines? Reach the next level of your dream career in Engineering with this technically advanced qualification, which is recognised Australia-wide..
Entry Requirements
School Leaver
Non-School Leaver
AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent
Completion of WACE General or ATAR or equivalent (minimum C Grades)
Certificate III
This course is also available as a traineeship.
Entrance requirements for traineeships
You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship.
In a traineeship you also gain hands-on skills and work experience, and improve your employment prospects, while earning a wage. On successful completion you will gain a nationally recognised qualification which can lead to rewarding career options. The difference between a traineeship and an apprenticeship is that a traineeship can be either a full time or part time employment based training arrangement, usually for a nominal duration of 12 months or more, generally in a non-trade related area.
To find out how to arrange a traineeship and study at South Metropolitan TAFE, please contact the Jobs and Skills Centre closest to you.
Entrance requirements for part-time study
You must have a trade certificate (minimum Certificate III) or an overseas graduate certificate to qualify for this course.
Are you revved up for a body building career?. When you complete the Certificate II in Automotive Manufacturing Production - Bus, Truck and Trailer (Vehicle Body Building Pre-Apprenticeship) you'll have what employers are looking for in an apprentice vehicle body builder.
Entry Requirements
School Leaver
Non-School Leaver
AQF
OLNA or NAPLAN 9 Band 8
C Grades in Year 10 English and Maths or equivalent
Launch your career in Automotives!. With this Certificate II you will learn to identify and inspect mechanical and electrical components as well as systems of light vehicles, heavy vehicles and outdoor power equipment.
Entry Requirements
School Leaver
Non-School Leaver
AQF
OLNA or NAPLAN 9 Band 8
C Grades in Year 10 English and Maths or equivalent
This training will give you the skills and knowledge required to create visual designs for interactive media components that can be integrated into a range of media products.
Entry Requirements
You will be required to: A. Attend an interview to prove your interest in creating media content. B. Provide a portfolio of your video, audio or photographic work. C. Complete three comprehension exercises with written, aural and visual comprehension tasks.
When you complete this course, you will be ready for a career in the Graphic Design industry. You will have the skills and knowledge to combine technical, creative and conceptual skills to create designs that meet client requirements and solve a range of visual communication challenges.
Entry Requirements
School Leaver
Non-School Leaver
AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent
Completion of WACE General or ATAR or equivalent (minimum C Grades)
In this course, you will combine specialised technical, creative and conceptual skills to prepare for, and develop an emerging arts practice. You will gain the skills and knowledge to be able to plan and realise a body of work in one or more art forms.
Entry Requirements
Individuals must provide evidence of their technical and organisational skills to conceptualise and create works in selected visual arts media via portfolio submission and interview prior to enrolment.
Skills and knowledge may have been acquired through experience in creative practice or formal study such as a completion of a Certificate IV in Visual Arts CUA41320 or its predecessor.
Students who have achieved a Skill Set from the Certificate IV can progress to the same Diploma Skill Set. EG: Drawing, Painting, Sculpture, Digital Art with discussion and approval of the teacher.
This qualification will provide you with the skills and knowledge to be competent in a range of Mobile Plant Technology roles. You will gain and apply a broad set of skills and knowledge on a variety of mobile plant vehicles in the automotive service and repair industry.
Entry Requirements
Early in the course your skills will be assessed - if you cannot read and write documents and complete maths work to the level needed you will be enrolled into additional subjects to help you build the skills needed to successfully complete the course.
If you are entering this course as an apprentice/trainee you must: - be employed in the auto industry - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Apprentice Network Provider (ANP) prior to enrolment.
If you already have skills in this area, you may seek recognition for all or part of this course.
This qualification will provide you with the skills and knowledge to be competent in a range of Heavy Commercial Vehicle Mechanical roles. You will gain and apply a broad set of skills and knowledge on a variety of heavy commercial vehicles in the automotive mechanical service and repair sector.
Entry Requirements
Early in the course your skills will be assessed - if you cannot read and write documents and complete maths work to the level needed you will be enrolled into additional subjects to help you build the skills needed to successfully complete the course.
If you are entering this program as an apprentice/trainee you must: - be employed in the auto industry - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Apprentice Network Provider (ANP) prior to enrolment. - If you already have skills in this area, you may seek recognition for all or part of this course.
This course covers metal fabrication and welding skills that are required for employment within our local and regional industry. You will gain the skills and knowledge required of an engineering tradesperson within the light or heavy fabrication trades including welding and fabrication, e.g.
Entry Requirements
You must:
- be employed in the metals industry
AND
- be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Apprentice Network Provider (ANP) prior to enrolment
Additional Information: This qualification may also be achieved through other pathways which do not involve a contract of training, such as recognition of prior learning. In all cases achievement or recognition of competence is necessary in all of the required units of competency to be awarded a national qualification
This entry-level qualification gives students an introductory understanding of music theory, foundation skills in live and studio production environments, and an understanding of current sound production technologies.
Entry Requirements
Although an entry level qualification, students entering this course will have a background in music/sound from either high school or amateur experience. Students intending to enrol in the Introduction to Ensembles cluster will need to contact the Music Industry Centre (MIC) on 6207 3583 to book an audition.
Ready to bring screens to life through mastering the art of animation and digital effects? . Develop an in-demand skillset and harness your creativity whilst embarking on your journey in an exciting and ever-evolving industry.
Entry Requirements
School Leaver
Non-School Leaver
AQF
C Grades in Year 11 WACE General English, and OLNA; or NAPLAN 9 Band 8
C Grades in Year 11 English and Maths or equivalent
Certificate II or Certificate III
This course is not available to study by applicants outside of WA.
Take command of your maritime career, become a master of the seas and rise to the top as the ship's most responsible officer.. This course will allow you to work in international waters as a: Master, Chief mate or Watchkeeper deck officer on ships of any gross tonnage in any operating area.
Entry Requirements
School Leaver
Non-School Leaver
AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent
Completion of WACE General or ATAR or equivalent (minimum C Grades)
Certificate III
Prospective students should hold one of the following:
A Diploma of Maritime Operations (Watchkeeper Deck) or
A Diploma of Maritime Operations (Master less than 500 GT) or
A Master less than 80 metres near coastal.
In addition to successful completion of Advanced Diploma of Maritime Operations (Master Unlimited), the Australian Maritime Safety Authority (AMSA) requires students to successfully complete each of the following to be issued with a new certificate of competency:
Meet medical test requirements
Completed qualifying sea service as an officer in charge of a navigational watch in accordance with AMSA requirements, see link below.
Pass a final assessment at an AMSA office
People seeking certification should contact the marine regulators, Australian Maritime Safety Authority. Phone: (02) 6279 5000 (8.00am to 5.00pm, Monday to Friday EST) or visit the website
