Updating Results
Menu
Updating Results

Search Courses

Showing 11 items

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate II in Electronics

    Certificate

    Are you interested in working in the Electrotechnology industry? This course delivers the basic foundations in electronics, refrigeration and air conditioning and electrical along with workplace safety skills so you can begin a career in this industry.

    Entry Requirements

  • University of Southern Queensland (USQ)

    University of Southern Queensland (USQ)

    Associate Degree of Engineering (Electrical & Electronic Engineering)

    Associate Degree

    Charge up your career in a wide range of industries with UniSQ's Associate Degree of Engineering (Electrical and Electronic Engineering), or set a steppingstone for further study.

    Entry Requirements

    Entry requirements

    Find the entry requirements most relevant to you.

    Recent secondary education
    Adjusted
    Entry score including adjustment factors (additional points given in certain circumstances).
    		 Unadjusted
    Entry score not including adjustment factors.
    ATAR
    The Australian Tertiary Admission Rank (ATAR) is a percentile rank used to assess the results of high-school applicants for undergraduate entry into university.
    62.70
    62.25
    Pre-requisites

    To study this degree we assume you have sound knowledge in:

    • English (Units 3 & 4, C), and
    • General Mathematics (Units 3 & 4, C)

    We assume that your knowledge is equivalent to a grade C or higher in Units 3 and 4 at high school level (typically studied in Year 12). Find out more about assumed knowledge.

    It is also recommended that you have studied Mathematical Methods (Units 3 & 4, C), or equivalent.

    Inherent requirements

    There are inherent requirements that must be met in order to successfully complete this degree. Inherent requirements are fundamental skills, capabilities and knowledge that students must be able to demonstrate in order to achieve the essential learning outcomes of the degree, while maintaining the academic integrity of the degree. Please read and understand the inherent requirements specific to the Associate Degree of Engineering before applying.

    If you think you may experience any problems meeting inherent requirements, you can talk to a Student Equity Officer about reasonable adjustments that may be put in place to assist you. Any reasonable adjustments made must not fundamentally change the nature of the inherent requirement.

    Further admission information

    Adjustments are additional points given in certain circumstances that may increase your Rank. Find out if you qualify for any adjustment factor pathways such as educational disadvantage where you live, and subjects you passed.

    UniSQ is committed to greater admissions transparency. Learn more about the education and work experience, as well as average Ranks for this degrees' student cohort from the previous year.

    Tafe (VET) qualification

    If you have completed a qualification from a TAFE or qualified private provider, you may be able to use these qualifications to meet UniSQ's entry requirements.

    Work and life experience

    You may be able to use your work experience and other adjustment factors to increase your selection rank and meet UniSQ's entry requirements.

    English language requirements

    You are required to satisfy the applicable English language requirements and this degree requires a minimum of IELTS 6.0 or equivalent. If you do not meet the English language requirements you may apply to study a University-approved English language program.

    Recognition of prior learning or work experience

    You may be eligible for recognition of prior learning if you have previously studied or have relevant work experience. This will help to reduce the number of courses that you need to study to finish your program.

    Pathways

    If you don't meet the entry requirements, we have pathway options available to you.

    If you identify as being of Aboriginal or Torres Strait Islander descent you may be eligible to enter the Indigenous Higher Education (IHEPP) program.

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate III in Automotive Refinishing Technology

    Certificate

    This course will provide you with the skills and knowledge required to paint, refinish, repair and maintain the painted surfaces of body of cars, heavy vehicles and other vehicles in the automotive industry.

    Entry Requirements

    If you are entering this course as an apprentice/trainee you must:
    - be employed in the auto industry
    - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Apprentice Network Provider (ANP) prior to enrolment.

    If you already have skills in this area, you may seek recognition for all or part of this course.

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate II in Electronics UEE21920

    Certificate

    Are you interested in working in the Electrotechnology industry? If the answer is yes, you could be on your way to possibly gaining an apprenticeship/traineeship.

    Entry Requirements

    To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate III in Electronics and Communications UEE30920

    Certificate

    This course provides training in selecting, installing, setting up, testing, fault finding, repairing and maintenance of electronic equipment and devices at component/sub-assembly level. There are elective options in radio frequency and security.

    Entry Requirements

    If you are entering this program as an apprentice/trainee you must:
    * be employed in industry
    * be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Australian Apprenticeship Centre (AAC) prior to enrolment.

    This program has pre-requisite requirements as shown below. All prerequisites must be achieved. Discuss with a CIT teacher during enrolment to ensure you have met these requirements.

    To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).

    To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate III in Electronics and Communications

    Certificate

    This course provides training in selecting, installing, setting up, testing, fault finding, repairing and maintenance of electronic equipment and devices at component/sub-assembly level. There are elective options in radio frequency and security.

    Entry Requirements

    If you are entering this course as an apprentice/trainee you must:
    - be employed in industry
    - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Australian Apprenticeship Centre (AAC) prior to enrolment.

    This course has pre-requisite requirements as shown below. All prerequisites must be achieved. Discuss with a CIT teacher during enrolment to ensure you have met these requirements.

    To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate III in Automotive Body Repair Technology

    Certificate

    This course will provide you with the skills and knowledge required to repair and maintain the body of cars, heavy vehicles and other vehicles in the automotive industry.

    Entry Requirements

    If you are entering this course as an apprentice/trainee you must:

    - be employed in the auto industry
    - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Apprentice Network Provider (ANP) prior to enrolment.

    If you already have skills in this area, you may seek recognition for all or part of this course.

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate III in Light Vehicle Mechanical Technology

    Certificate

    This course provides you with the skills and knowledge required to be able to perform a broad range of tasks on a variety of light vehicles in the automotive service and repair industry.

    Entry Requirements

    Early in the program your skills will be assessed - if you cannot read and write documents and complete maths work to the level needed you will be enrolled into additional subjects to help you build the skills needed to successfully complete the program.

    If you are entering this course as an apprentice/trainee you must:
    - be employed in the auto industry
    - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Apprentice Network Provider (ANP) prior to enrolment.

    If you already have skills in this area, you may seek skills recognition for all or part of this course.

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate III in Electrotechnology Electrician

    Certificate

    Do you want to be a Sparky? This qualification provides you with the skills and knowledge to select, install, set up, test, fault find, repair and maintain electrical systems and equipment in buildings and premises.

    Entry Requirements

    As you are entering this course as an apprentice under the Australian Apprenticeships arrangements, you must be employed in the electrical contracting industry and you must register with an Apprentice Network Provider (ANP) prior to enrolment.

    You MUST be supervised by licensed electrician.
    This program has pre-requisite requirements, all prerequisites must be achieved. Discuss with a CIT teacher during enrolment to ensure you have met these requirements.

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate III in Automotive Electrical Technology

    Certificate

    This course provides training for automotive electrical apprentices to repair and maintain the electrical systems and components of cars and other vehicles. You must be an apprentice or trainee to enrol in this course.

    Entry Requirements

    If you are entering this program as an apprentice/trainee you must:
    - be employed in the auto industry
    - be an Apprentice or Trainee under the Australian Apprenticeship

    Scheme (AAS) and be registered with an Apprentice Network Provider (ANP) prior to enrolment.
    If you already have skills in this area, you may seek recognition for all or part of this program.