Want to work on international engineering projects?. Gain advanced skills in the design and drafting of engineering plans to Australian and New Zealand standards and you could be working on local, interstate or international engineering projects.
Become an energy champion with a Graduate Certificate in Energy and Carbon Studies. Help address climate change by developing your knowledge and skills in renewable and sustainable energy, as well as carbon and energy management.
Entry Requirements
Recognised Bachelor's degree (AQF Level 7) or higher, or equivalent training, or satisfactory preparation for the course through previous study or professional experience. Some of the units taken assume some prior knowledge, details of which are given in the description of each unit in the Handbook. The most common of these is the high school Physics prerequisite for units such as Energy in Society, Energy Management, and Energy Systems. Some students may therefore need to complete additional prerequisite units.
Gain specialist skills and knowledge in electronics, materials and processing and mechanical engineering with an internationally relevant Master of Engineering Practice.
This qualification is suitable for people working in an entry level position in the maritime industry as a General Purpose Hand under the direct supervision of the master or engineer of a commercial vessel to: assist as a general hand on deck or in the engine room of a commercial vessel length as...
Are you looking for a career in construction using the largest tools?. When you complete the Certificate III in Civil Construction (Civil Construction General) you'll be building a career as a mobile plant operator, bridge construction worker, pipe layer, or road construction worker.
Entry Requirements
School Leaver
Non-School Leaver
AQF
OLNA or NAPLAN 9 Band 8
C Grades in Year 10 English and Maths or equivalent
Certificate I or Certificate II
This course is available as an apprenticeship.
Entrance requirements for apprenticeships
You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship.
In a traineeship you also gain hands-on skills and work experience, and improve your employment prospects, while earning a wage. On successful completion you will gain a nationally recognised qualification which can lead to rewarding career options. The difference between a traineeship and an apprenticeship is that a traineeship can be either a full time or part time employment based training arrangement, usually for a nominal duration of 12 months or more, generally in a non-trade related area.
To find out how to arrange a traineeship and study at South Metropolitan TAFE, please contact the Jobs and Skills Centre closest to you.
When you complete this course, you will be ready for a career in building design. You will have the skills and knowledge to apply your skills to diverse building design projects.
Entry Requirements
School Leaver
Non-School Leaver
AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent
Completion of WACE General or ATAR or equivalent (minimum C Grades)
Certificate III
Entry to this qualification is open to individuals who:
Hold CPP40115 Certificate IV Building Design Drafting or
CPP40121 Certificate IV Residential Drafting or
52757WA Certificate IV in Residential Building Drafting
This certificate enables you to work as a Master or Chief mate on vessels less than 500 gross tonnage in any operating area and as Watchkeeper deck officer on vessels of any gross tonnage and in any operating area. Watchkeeper deck officer on ships of any gross tonnage in any operating area.
Have you got a keen eye for drafting and design, and want to make your mark in the world of mechanics and machines? Reach the next level of your dream career in Engineering with this technically advanced qualification, which is recognised Australia-wide..
Entry Requirements
School Leaver
Non-School Leaver
AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent
Completion of WACE General or ATAR or equivalent (minimum C Grades)
Certificate III
This course is also available as a traineeship.
Entrance requirements for traineeships
You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship.
In a traineeship you also gain hands-on skills and work experience, and improve your employment prospects, while earning a wage. On successful completion you will gain a nationally recognised qualification which can lead to rewarding career options. The difference between a traineeship and an apprenticeship is that a traineeship can be either a full time or part time employment based training arrangement, usually for a nominal duration of 12 months or more, generally in a non-trade related area.
To find out how to arrange a traineeship and study at South Metropolitan TAFE, please contact the Jobs and Skills Centre closest to you.
Entrance requirements for part-time study
You must have a trade certificate (minimum Certificate III) or an overseas graduate certificate to qualify for this course.
Take the first steps towards getting started in your Automotive career with this entry-level pre-employment course in Automotive Vocational Preparation, and get the basic skills you need to seek employment within the automotive mechanical or autobody repair industry.
Entry Requirements
You will be required to undertake the Basic Knowledge Skills Builder (BKSB) to confirm you have the required Language, Literacy and Numeracy (LLN) skills to work at Australian Core Skills Framework (ACSF) exit level 2 or higher. Account details and instructions will be sent to you within 24 hours of applying. If you have previously undertaken the Literacy and Numeracy Assessment - we will review your results and notify you if further action is required.
Are you revved up for a body building career?. When you complete the Certificate II in Automotive Manufacturing Production - Bus, Truck and Trailer (Vehicle Body Building Pre-Apprenticeship) you'll have what employers are looking for in an apprentice vehicle body builder.
Entry Requirements
School Leaver
Non-School Leaver
AQF
OLNA or NAPLAN 9 Band 8
C Grades in Year 10 English and Maths or equivalent
Launch your career in Automotives!. With this Certificate II you will learn to identify and inspect mechanical and electrical components as well as systems of light vehicles, heavy vehicles and outdoor power equipment.
Entry Requirements
School Leaver
Non-School Leaver
AQF
OLNA or NAPLAN 9 Band 8
C Grades in Year 10 English and Maths or equivalent
The Certificate in Indigenous Narrative (CertIndigNarr) will introduce you to indigenous storytelling in the digital media industry, from films to video games and more.
Entry Requirements
Admission to UC with University Entrance (or equivalent) is required to enrol.
If English is your additional language, you are also required to meet UC's English language requirements.
For information on the enrolment process, please see how to apply for undergraduate qualifications.
Explore canine behaviour and welfare, develop your understanding of the roles and requirements of canine-related industries in New Zealand, and apply your knowledge through extensive practical canine training.
Entry Requirements
What you will need to study this programme.
Domestic students
Academic requirements
You must have completed the following:
40 credits at NCEA Level 1, including 10 Literacy credits and 10 Numeracy credits; or a recognised equivalent;
a relevant qualification at NZQF Level 2 or above; OR
a recognised equivalent
And meet one of the English entry requirements;
Evidence of English language proficiency as outlined in the NZQA Rules on the Unitec English Language Requirements for International Students Web-page.
Additional requirements
Non-academic requirements
Fill in the following forms:
Ministry of Justice criminal conviction history form
Medical declaration form
Don't meet these Academic requirements?
If you don't meet the academic criteria, our Bridging Education Programmes can help you qualify. Simply apply online, and we'll discuss your next steps.
If you don't meet the above criteria, special or discretionary admission may apply; your eligibility will be determined at the interview.
Note on referees: One referee needs to be an employer where you have worked with the public and one from a teacher (or similar), who can talk about your character.
For more information, download the programme regulations (PDF 280 KB)
Aotearoa's space industry is growing, as is its capacity for innovation in industry and research. The PGDipAerospaceEng is designed to equip students with the core technical foundations to steer you in a path towards a career in this field.
Earthquake engineers design new buildings and infrastructure to withstand disasters, and assess the vulnerability of existing buildings and infrastructure, drawing from expertise in structural and geotechnical engineering.
The PGDipMaterialsEng is for those who aspire to a career in materials processing and production, manufacturing, new materials deployment and development disciplines either in a technical or management role.
