Updating Results
Menu
Updating Results

Search Courses

Showing 28 items

  • Victoria University of Wellington

    Victoria University of Wellington

    Master of Engineering by thesis and coursework

    Masters (Coursework)

    Build on your BE(Hons), hone your skills and improve your career prospects with advanced study in modern, high-tech engineering.

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate III in Mobile Plant Technology

    Certificate

    This qualification will provide you with the skills and knowledge to be competent in a range of Mobile Plant Technology roles. You will gain and apply a broad set of skills and knowledge on a variety of mobile plant vehicles in the automotive service and repair industry.

    Entry Requirements

    Early in the course your skills will be assessed - if you cannot read and write documents and complete maths work to the level needed you will be enrolled into additional subjects to help you build the skills needed to successfully complete the course.

    If you are entering this course as an apprentice/trainee you must:
    - be employed in the auto industry
    - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Apprentice Network Provider (ANP) prior to enrolment.

    If you already have skills in this area, you may seek recognition for all or part of this course.

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate III in Heavy Commercial Vehicle Mechanical Technology

    Certificate

    This qualification will provide you with the skills and knowledge to be competent in a range of Heavy Commercial Vehicle Mechanical roles. You will gain and apply a broad set of skills and knowledge on a variety of heavy commercial vehicles in the automotive mechanical service and repair sector.

    Entry Requirements

    Early in the course your skills will be assessed - if you cannot read and write documents and complete maths work to the level needed you will be enrolled into additional subjects to help you build the skills needed to successfully complete the course.

    If you are entering this program as an apprentice/trainee you must:
    - be employed in the auto industry
    - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Apprentice Network Provider (ANP) prior to enrolment.
    - If you already have skills in this area, you may seek recognition for all or part of this course.

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate III in Engineering - Fabrication Trade

    Certificate

    This course covers metal fabrication and welding skills that are required for employment within our local and regional industry. You will gain the skills and knowledge required of an engineering tradesperson within the light or heavy fabrication trades including welding and fabrication, e.g.

    Entry Requirements

    You must:

    - be employed in the metals industry

    AND

    - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Apprentice Network Provider (ANP) prior to enrolment

    Additional Information: This qualification may also be achieved through other pathways which do not involve a contract of training, such as recognition of prior learning. In all cases achievement or recognition of competence is necessary in all of the required units of competency to be awarded a national qualification

    To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).

  • Massey University

    Massey University

    Bachelor of Aviation Management

    Bachelor

    The Bachelor of Aviation Management (BAvMan) is a dedicated aviation qualification which will introduce you to various aspects of the aviation industry.

    Entry Requirements

    There are no specific entry requirements for this programme, outside of university admission regulations.

  • University of Canberra

    University of Canberra

    Bachelor of Engineering (Honours)

    Bachelor (Honours)

    <strong>Engineer the future to solve the unimaginable </strong> <p>Draw on your love for critical thinking and become an innovative problem solver for a brighter tomorrow with UC's highly respected...

    Entry Requirements

    Admission to this course is based on an entrance rank. A rank can be achieved by the following means:
    - Year 12 ATAR
    - other Australian Qualification
    - work experience
    - overseas qualification

    We also offer a number of entry initiatives that give you the opportunity to gain entry to the University via alternate pathway programs and admissions schemes.
    More information is available on our Alternative Entry page: http://www.canberra.edu.au/future-students/applications/apply-now/alternative-entry

    Additional admission requirements

    Year 12 Mathematical Methods (T) or equivalent.

    Assumed knowledge

    Basic knowledge and skills in ICT (Information and Communication Technology); Basic numeracy and literacy skills.

    Periods course is open for new admissions
    Year Location Teaching period Teaching start date Domestic International
    2024 Bruce, Canberra Semester 1 05 February 2024
    2024 Bruce, Canberra Semester 2 29 July 2024
    2025 Bruce, Canberra Semester 1 03 February 2025
    2025 Bruce, Canberra Semester 2 28 July 2025
    2026 Bruce, Canberra Semester 1 02 February 2026
    2026 Bruce, Canberra Semester 2 27 July 2026
    Credit arrangements

    A credit transfer arrangement is available for this course for the following institutions:

    Melbourne College Of Advanced Studies

    Bachelor Qualifying Program (BQP) Business Course (Completion of one semester's study) (31807)
    Bachelor Qualifying Program (BQP) Business Course (Completion of two semester's study) (31885)
    Bachelor Qualifying Program (BQP) Engineering Course (Completion of one semester's study) (31865)
    Bachelor Qualifying Program (BQP) Engineering Course (two semesters study with EE1 and EE2) (31984)
    Bachelor Qualifying Program (BQP) Engineering Course (two semesters study without EE1 and EE2) (31985)
    Bachelor Qualifying Program (BQP) Science-IT Course (completion of one semester's study) (32024)
    Bachelor Qualifying program (BQP) Science-IT Course (completion of two semester's study) (32184)

    University Of Canberra College

    Diploma of Information Technology (31746)

    See more

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate II in Electronics

    Certificate

    Are you interested in working in the Electrotechnology industry? This course delivers the basic foundations in electronics, refrigeration and air conditioning and electrical along with workplace safety skills so you can begin a career in this industry.

    Entry Requirements

  • Victoria University of Wellington

    Victoria University of Wellington

    Master of Renewable Energy

    Masters (Coursework)

    Learn how to design, develop, and promote clean energy systems-the key to a resilient and sustainable future.

  • University of Canberra

    University of Canberra

    Bachelor of Engineering Technology

    Bachelor

    Bachelor of Engineering Technology (BET) introduces students to the essential core knowledge and skills in the field of information and communication technology (ICT), along with comprehensive knowledge and skills ranging...

    Entry Requirements

    This course is only available to students transferring from other degrees, offered either by the University of Canberra or approved articulation partners. Students will need to be eligible for at least 24 credit points of credit prior to admission. In all other aspects, normal UC admission requirements to an undergraduate course apply.

    Assumed knowledge

    Basic knowledge and skills in ICT (Information and Communication Technology) and basic numeracy and literacy skills.

    Periods course is open for new admissions
    Year Location Teaching period Teaching start date Domestic International
    2024 Bruce, Canberra Semester 1 05 February 2024
    2024 Bruce, Canberra Semester 2 29 July 2024
    2025 Bruce, Canberra Semester 1 03 February 2025
    2025 Bruce, Canberra Semester 2 28 July 2025
    2026 Bruce, Canberra Semester 1 02 February 2026
    2026 Bruce, Canberra Semester 2 27 July 2026
    Credit arrangements

    There are currently no formal credit transfer arrangements for entry to this course. Any previous study or work experience will only be considered as part of the application process in accordance with current course rules and university policy.

  • Massey University

    Massey University

    Certificate in Aviation Studies

    Certificate

    Massey University's Certificate of Aviation Studies is the only one of its kind in New Zealand. Massey is the only place in New Zealand where you can turn your passion for aviation into a tertiary qualification.

    Entry Requirements

    There are no specific entry requirements for this programme, outside of university admission regulations.

  • Victoria University of Wellington

    Victoria University of Wellington

    Master of Engineering by thesis

    Masters (Coursework)

    Build on your BE(Hons), hone your skills and improve your career prospects with advanced study in modern, high-tech engineering.

  • Victoria University of Wellington

    Victoria University of Wellington

    Bachelor of Engineering with Honours

    Bachelor (Honours)

    If you enjoy solving problems and finding out how things work, and if you want to create technology that makes the world a better place, then the Bachelor of Engineering with Honours is the right degree for you.

    Entry Requirements

    University Entrance or alternative admission type.Achieve the International Baccalaureate Diploma, or three GCE Advanced Level passes at C grade, or equivalent.
  • Massey University

    Massey University

    Master of Aviation

    Masters (Coursework)

    Massey University's Master of Aviation will give you the knowledge and skills you need to gain a more in-depth understanding of aviation and advance your career. This programme offers taught courses and independent research.

    Entry Requirements

    To enter the Master of Aviation, you will have been awarded or qualified for a Bachelor of Aviation, Bachelor of Aviation Management or equivalent qualification, and have achieved a minimum B- grade average in the highest level courses.

    If you have been awarded the Degree of Bachelor of Aviation Management with Honours, or the equivalent degree of another recognised university, you may apply for credit towards Part One of the qualification in accordance with the limits specified in the Recognition of Prior Learning regulations.

    You will need to provide verified copies of all academic transcripts for studies taken at all universities other than Massey University.

  • Victoria University of Wellington

    Victoria University of Wellington

    Master of Engineering Practice

    Masters (Coursework)

    Fast-track your career in Engineering with the one-year Master of Engineering Practice.

  • Victoria University of Wellington

    Victoria University of Wellington

    Master of Applied Statistics

    Masters (Coursework)

    Advance your Bachelor's degree with postgraduate study and professional training in statistical techniques.

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Diploma of Engineering - Technical

    Diploma

    This course will give you the engineering skills and knowledge required for an engineering draftsperson producing engineering drawings or a technical officer involved in basic project management, procurement and sales within an engineering or manufacturing work environment.

    Entry Requirements

    To be successful in this course, it is recommended that you have appropriate numeracy skills. On entry, you may need to demonstrate this by undertaking a numeracy assessment. You may be required to undertake additional Foundation Skills subjects to support your learning in this course.

    To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate III in Automotive Refinishing Technology

    Certificate

    This course will provide you with the skills and knowledge required to paint, refinish, repair and maintain the painted surfaces of body of cars, heavy vehicles and other vehicles in the automotive industry.

    Entry Requirements

    If you are entering this course as an apprentice/trainee you must:
    - be employed in the auto industry
    - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Apprentice Network Provider (ANP) prior to enrolment.

    If you already have skills in this area, you may seek recognition for all or part of this course.

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate II in Electronics UEE21920

    Certificate

    Are you interested in working in the Electrotechnology industry? If the answer is yes, you could be on your way to possibly gaining an apprenticeship/traineeship.

    Entry Requirements

    To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).