Updating Results
Menu
Updating Results

Search Courses

Showing 25 items

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate III in Mobile Plant Technology

    Certificate

    This qualification will provide you with the skills and knowledge to be competent in a range of Mobile Plant Technology roles. You will gain and apply a broad set of skills and knowledge on a variety of mobile plant vehicles in the automotive service and repair industry.

    Entry Requirements

    Early in the course your skills will be assessed - if you cannot read and write documents and complete maths work to the level needed you will be enrolled into additional subjects to help you build the skills needed to successfully complete the course.

    If you are entering this course as an apprentice/trainee you must:
    - be employed in the auto industry
    - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Apprentice Network Provider (ANP) prior to enrolment.

    If you already have skills in this area, you may seek recognition for all or part of this course.

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate III in Heavy Commercial Vehicle Mechanical Technology

    Certificate

    This qualification will provide you with the skills and knowledge to be competent in a range of Heavy Commercial Vehicle Mechanical roles. You will gain and apply a broad set of skills and knowledge on a variety of heavy commercial vehicles in the automotive mechanical service and repair sector.

    Entry Requirements

    Early in the course your skills will be assessed - if you cannot read and write documents and complete maths work to the level needed you will be enrolled into additional subjects to help you build the skills needed to successfully complete the course.

    If you are entering this program as an apprentice/trainee you must:
    - be employed in the auto industry
    - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Apprentice Network Provider (ANP) prior to enrolment.
    - If you already have skills in this area, you may seek recognition for all or part of this course.

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate III in Engineering - Fabrication Trade

    Certificate

    This course covers metal fabrication and welding skills that are required for employment within our local and regional industry. You will gain the skills and knowledge required of an engineering tradesperson within the light or heavy fabrication trades including welding and fabrication, e.g.

    Entry Requirements

    You must:

    - be employed in the metals industry

    AND

    - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Apprentice Network Provider (ANP) prior to enrolment

    Additional Information: This qualification may also be achieved through other pathways which do not involve a contract of training, such as recognition of prior learning. In all cases achievement or recognition of competence is necessary in all of the required units of competency to be awarded a national qualification

    To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).

  • Massey University

    Massey University

    Bachelor of Aviation Management

    Bachelor

    The Bachelor of Aviation Management (BAvMan) is a dedicated aviation qualification which will introduce you to various aspects of the aviation industry.

    Entry Requirements

    There are no specific entry requirements for this programme, outside of university admission regulations.

  • Massey University

    Massey University

    Master of Engineering Studies

    Masters (Coursework)

    Note: This programme may have an on-campus or in-person requirement and therefore requires that students submit a current My Vaccine Pass on enrolment. Massey's Master of Engineering Studies combines taught and research courses at a postgraduate level.

    Entry Requirements

    To enter the Master of Engineering Studies you will have been awarded or qualified for:

  • Massey University

    Massey University

    Graduate Diploma in Aviation

    Graduate Diploma

    Note: The Flight Instruction specialisation of this programme may have an on-campus or in-person requirement and therefore requires that students submit a current My Vaccine Pass on enrolment.

    Entry Requirements

    To enter the Graduate Diploma in Aviation you will:

    • have been awarded or qualified for a bachelor's degree, or equivalent, or
    • have demonstrated equivalent practical, professional and/or scholarly experience
    • meet the prerequisite requirements for the 200-level courses.

    If you do not have a bachelor's degree, you will need to supply a copy of your CV including academic and work history.

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate II in Electronics

    Certificate

    Are you interested in working in the Electrotechnology industry? This course delivers the basic foundations in electronics, refrigeration and air conditioning and electrical along with workplace safety skills so you can begin a career in this industry.

    Entry Requirements

  • Massey University

    Massey University

    Bachelor of Aviation

    Bachelor

    Note: This programme may have an on-campus or in-person requirement and therefore requires that students submit a current My Vaccine Pass on enrolment. Massey is the only place in New Zealand where you can turn your passion for aviation into a university qualification.

    Entry Requirements

    This programme is a selected entry programme. This means there are a number of extra requirements you must meet.

    To enter the Bachelor of Aviation programme, you must pass NCEA Level 3/Year 13 or equivalent in an 'English-rich' subject. These include one of the following:

    • classical studies
    • English
    • geography
    • history
    • history of art
    • media studies
    • religious education (RE)
    • business studies
    • biology
    • economics.

    When you first apply online you need to:

    • provide a CV including academic and work history
    • have completed a trial flight
    • provide any information of circumstances in your past personal or professional life that might make you ineligible to train for, or hold, a professional pilots licence in New Zealand (see below for more information).

    If you already have a NZCAA Class One Medical Certificate please also upload a copy with your application. But this is not essential for your initial application.

    There are two more stages to the application process:

  • Australian National University (ANU)

    Australian National University (ANU)

    Master of Engineering in Renewable Energy

    Masters (Coursework)

    This two-year master qualification provides students with specialised knowledge and professional engineering skills to prepare them for a career in the rapidly-growing renewable energy industry.

    Entry Requirements

    A Bachelor of Engineering, Bachelor of Engineering (Honours) or international equivalent with a minimum GPA of 5.0/7.0

    Cognate Disciplines

    Electrical Engineering, Electronic Engineering, Photovoltaic/Renewable Energy Engineering, Power Engineering, Mechanical Engineering

    English Language Requirements

    All applicants must meet the University’s English Language Admission Requirements for Students.

    Assessment of Qualifications

    Unless otherwise indicated, ANU will accept all Australian Qualifications Framework (AQF) qualifications or international equivalents that meet or exceed the published admission requirements of our programs, provided all other admission requirements are also met. Where an applicant has more than one completed tertiary qualification, ANU will base assessment on the qualification that best meets the admission requirements for the program. Find out more about the Australian Qualifications Framework: www.aqf.edu.au

    ANU uses a 7-point Grade Point Average (GPA) scale. All qualifications submitted for admission at ANU will be converted to this common scale, which will determine if an applicant meets our published admission requirements. Find out more about how a 7-point GPA is calculated for Australian universities: www.uac.edu.au/future-applicants/admission-criteria/tertiary-qualifications

    Unless otherwise indicated, where an applicant has more than one completed tertiary qualification, ANU will calculate the GPA for each qualification separately. ANU will base assessment on the best GPA of all completed tertiary qualifications of the same level or higher.

     

     

     

    Indicative fees Domestic International Annual indicative fee for domestic students $32,256.00

    For more information see: http://www.anu.edu.au/students/program-administration/costs-fees

    Annual indicative fee for international students $45,600.00 Scholarships

    ANU offers a wide range of scholarships to students to assist with the cost of their studies.

    Eligibility to apply for ANU scholarships varies depending on the specifics of the scholarship and can be categorised by the type of student you are. Specific scholarship application process information is included in the relevant scholarship listing.

    For further information see the Scholarships website.

  • Massey University

    Massey University

    Certificate in Aviation Studies

    Certificate

    Massey University's Certificate of Aviation Studies is the only one of its kind in New Zealand. Massey is the only place in New Zealand where you can turn your passion for aviation into a tertiary qualification.

    Entry Requirements

    There are no specific entry requirements for this programme, outside of university admission regulations.

  • Massey University

    Massey University

    Bachelor of Engineering with Honours

    Bachelor (Honours)

    Note: This programme may have an on-campus or in-person requirement and therefore requires that students submit a current My Vaccine Pass on enrolment.

    Entry Requirements

    There are no specific entry requirements for this programme, outside of university admission regulations.

  • Massey University

    Massey University

    Master of Engineering

    Masters (Coursework)

    Note: This programme may have an on-campus or in-person requirement and therefore requires that students submit a current My Vaccine Pass on enrolment.

    Entry Requirements

    • Bachelor of Engineering (Honours), or equivalent, with a minimum B average in the highest level majoring courses, or
    • Postgraduate Diploma in Engineering, or equivalent, with a minimum B grade average, or
    • Bachelor of Engineering with Honours, or equivalent and have significant professional experience, or
    • Postgraduate Diploma in Engineering, or equivalent and have significant professional experience.

    You will also provide:

    • a short summary of your research interests (200 words or less)
    • a curriculum vitae to show your significant professional experience.

    You need to provide verified copies of all academic transcripts for studies taken at all universities other than Massey University.

  • Massey University

    Massey University

    Master of Aviation

    Masters (Coursework)

    Massey University's Master of Aviation will give you the knowledge and skills you need to gain a more in-depth understanding of aviation and advance your career. This programme offers taught courses and independent research.

    Entry Requirements

    To enter the Master of Aviation, you will have been awarded or qualified for a Bachelor of Aviation, Bachelor of Aviation Management or equivalent qualification, and have achieved a minimum B- grade average in the highest level courses.

    If you have been awarded the Degree of Bachelor of Aviation Management with Honours, or the equivalent degree of another recognised university, you may apply for credit towards Part One of the qualification in accordance with the limits specified in the Recognition of Prior Learning regulations.

    You will need to provide verified copies of all academic transcripts for studies taken at all universities other than Massey University.

  • Massey University

    Massey University

    Master of Analytics

    Masters (Coursework)

    Massey's Master of Analytics will equip you with technical ability and competence in devising data-driven solutions. These are the skills needed to transform massive amounts of data into insights that enable better decision making and innovation both in the private and public sectors.

    Entry Requirements

    To enter the Master of Analytics you will:

    • have been awarded or qualified for a bachelor's degree in the subject in which you intend to specialise, or equivalent, with a minimum B grade average in the highest level courses
    • have sufficient background in statistical analysis tools to satisfy the Academic Board that you have the capacity to undertake the programme.

    You will provide the following documents:

    • Verified copies of all academic transcripts for studies taken at all universities other than Massey University.
    • Provide a current CV showing all relevant work experience with statistical software.
  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Diploma of Engineering - Technical

    Diploma

    This course will give you the engineering skills and knowledge required for an engineering draftsperson producing engineering drawings or a technical officer involved in basic project management, procurement and sales within an engineering or manufacturing work environment.

    Entry Requirements

    To be successful in this course, it is recommended that you have appropriate numeracy skills. On entry, you may need to demonstrate this by undertaking a numeracy assessment. You may be required to undertake additional Foundation Skills subjects to support your learning in this course.

    To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate III in Automotive Refinishing Technology

    Certificate

    This course will provide you with the skills and knowledge required to paint, refinish, repair and maintain the painted surfaces of body of cars, heavy vehicles and other vehicles in the automotive industry.

    Entry Requirements

    If you are entering this course as an apprentice/trainee you must:
    - be employed in the auto industry
    - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Apprentice Network Provider (ANP) prior to enrolment.

    If you already have skills in this area, you may seek recognition for all or part of this course.

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate II in Electronics UEE21920

    Certificate

    Are you interested in working in the Electrotechnology industry? If the answer is yes, you could be on your way to possibly gaining an apprenticeship/traineeship.

    Entry Requirements

    To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate III in Electronics and Communications UEE30920

    Certificate

    This course provides training in selecting, installing, setting up, testing, fault finding, repairing and maintenance of electronic equipment and devices at component/sub-assembly level. There are elective options in radio frequency and security.

    Entry Requirements

    If you are entering this program as an apprentice/trainee you must:
    * be employed in industry
    * be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Australian Apprenticeship Centre (AAC) prior to enrolment.

    This program has pre-requisite requirements as shown below. All prerequisites must be achieved. Discuss with a CIT teacher during enrolment to ensure you have met these requirements.

    To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).

    To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate III in Electronics and Communications

    Certificate

    This course provides training in selecting, installing, setting up, testing, fault finding, repairing and maintenance of electronic equipment and devices at component/sub-assembly level. There are elective options in radio frequency and security.

    Entry Requirements

    If you are entering this course as an apprentice/trainee you must:
    - be employed in industry
    - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Australian Apprenticeship Centre (AAC) prior to enrolment.

    This course has pre-requisite requirements as shown below. All prerequisites must be achieved. Discuss with a CIT teacher during enrolment to ensure you have met these requirements.

    To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).

  • Canberra Institute of Technology (CIT)

    Canberra Institute of Technology (CIT)

    Certificate III in Automotive Body Repair Technology

    Certificate

    This course will provide you with the skills and knowledge required to repair and maintain the body of cars, heavy vehicles and other vehicles in the automotive industry.

    Entry Requirements

    If you are entering this course as an apprentice/trainee you must:

    - be employed in the auto industry
    - be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Apprentice Network Provider (ANP) prior to enrolment.

    If you already have skills in this area, you may seek recognition for all or part of this course.